 |
 |
 |
 |
| Product Detail |
 |
Hammond Manufacturing - 30" x 20" x 6" Metal Enclosure with Hinged Clamped Cover
Application
• Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures
• Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection
Standards
• UL 508 Type 3R,12, 4
• CSA Type 3R, 12, 4
• Complies with:
NEMA Type 3R, 4, 12 and 13
JIC EGP-1-1967 unless marked
IEC 60529, IP66
Construction
• Formed 14 gauge steel bodies and doors
• Smooth, continuously welded seams without knockouts, cutouts or holes
• Door and body stiffeners are provided in the larger enclosures for extra rigidity
• Welded brackets provide for enclosure mounting
• Formed lip on door and enclosure exclude flowing liquids and contaminants
• Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin
• Door is secured with easily operated stainless steel clamps
• Provision for padlocking
• Oil resistant gaskets are permanently secured
• A removable 12 gauge inner panel is included
• Collar studs are provided for mounting inner panels
• A bonding stud is provided on the door and a grounding stud is provided in the enclosure
• A literature pocket is provided for the inside of the door
Finish
• Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating
• Removable inner panel is finished in white powder coating
Click here for 1418N4F6 Data Sheet 
Click here for 1418N4F6 CAD Drawing
|
|
 |
 |
|
|
|
 |
 |
 |
