 |
 |
 |
 |
| Product Detail |
 |
Hammond Manufacturing - 86.12" x 187" x 14.12" Freestanding Metal Enclosure with 5 Hinged Doors and Padlockable Handles
Inner Panels Included
Application
• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments
• Provides a degree of protection from falling dirt, dust, oil and water
Standards
• UL 508 Type 12
• CSA Type 12
• Complies with:
NEMA Type 12
JIC EGP-1-1967
IEC 60529, IP54
Construction
• Formed 10 gauge steel
• Smooth, continuously welded seams without knockouts, cutouts or holes
• Heavy duty body stiffeners are provided for extra rigidity
• Reinforced eyebolts are provided for easy enclosure lifting
• Double door openings have gasketed overlapping doors, eliminating the need for a center post
• Continuously hinged doors may be removed by pulling the hinge pin
• Doors are secured with a three point latch and operated with a vault type padlocking handle
• Latch rods are equipped with rollers for easier door closing
• Oil resistant gaskets are permanently secured and mechanically retained
• Removable 10 gauge inner panels are included: 5 door units have 3 panels (One 34" x 78" and Two
70" x 78")
• Slave doors have mechanical interlock and cannot be opened unless the master door is open
• Panel supports are provided in enclosures for easy panel installation
• Collar studs are provided for mounting inner panels
• A grounding stud is provided in the enclosure for each door and a bonding stud is provided on the door
• A literature pocket is provided for the inside of the door
Finish
• Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating on the outside, with
white powder coating on the inside
• Removable inner panels are finished in white powder coating
Click here for 1422MD5 Data Sheet 
Click here for 1422MD5 CAD Drawing
Click here for Technical Specifications
|
|
 |
 |
|
|
|
 |
 |
 |
