 |
 |
 |
 |
| Product Detail |
 |
Hammond Manufacturing - 30" x 42" x 10" Wallmount Metal Enclosure with 2 Hinged Doors and Lockable Handle
Inner Panel Included
Application
• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments
• Provides a degree of protection from falling dirt, dust, oil and water
Standards
• UL 508 Type 12
• CSA Type 12
• Complies with:
NEMA Type 12
IEC 60529, IP54
Construction
• Enclosures are formed 14 gauge steel
• Smooth, continuously welded seams without knockouts, cutouts or holes
• Body stiffeners are provided for extra rigidity
• Welded brackets provide for enclosure mounting
• Gasketed overlapping doors eliminate the need for a center post
• Continuously hinged doors may be removed by pulling the hinge pin
• Doors are secured with a three point latch and operated with a key locking automotive type handle
• Latch rods are equipped with rollers for easier door closing
• Oil resistant gaskets are permanently secured
• A removable 12 gauge inner panel is included in enclosures
• Collar studs are provided for mounting inner panels
• A grounding stud is provided in the enclosure and a bonding stud is provided on the door
• A literature pocket is provided for the inside of the door
Finish
• Cover and enclosure are phosphatized and finished in recoatable smooth ANSI 61 gray powder coating on
the outside, with white powder coating on the inside
• Removable inner panel is finished in white powder coating
Click here for 1422R10 Data Sheet 
Click here for 1422R10 CAD Drawing
Click here for Technical Specifications
|
|
 |
 |
|
|
|
 |
 |
 |
