The Stego FPI 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPI - Airflow direction in
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego 01010.0-10 DCM 010 series switch module/relay is used to control DC powered devices with high capacities in control and switch cabinets.

• Contact Type: Normally Open (NO)
• Switching Capacity : DC 13 A (Relay Output)
• 35mm DIN Rail Mountable

Compact convection heater of temperature class T3 (392 F / 200 C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• 2m Cable
• Temperature Class T3
• DIN Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Stego's CP061 series flat heater is used to provide an evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive contact to a component or a cabinet wall in need to be heated.

• 230 VAC
• 50W Heating Capacity
• Screw Mount
• Aluminum Housing

Stego's CP061 series flat heater is used to provide an evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive contact to a component or a cabinet wall in need to be heated.

• 230 VAC
• 100W Heating Capacity
• Screw Mount
• Aluminum

Stego's CP061 series flat heater is used to provide an evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive contact to a component or a cabinet wall in need to be heated.

• 120 VAC
• 50W Heating Capacity
• Screw Mount
• Aluminum Aluminum

Stego's CP061 series flat heater is used to provide an evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive contact to a component or a cabinet wall in need to be heated.

• 120 VAC
• 100W Heating Capacity
• Screw Mount
• Aluminum Aluminum

The CS 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air.

• DIN Mounting
• II (double insulated) / IP20
• UL File No. E150057, VDE, EAC

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature must be maintained above a minimum value.

• DIN Mounting
• I (grounded) / IP20
• UL File No. E150057, VDE, EAC

The CSF 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air.

• DIN Mounting
• Fixed Thermostat
• II (double insulated) / IP20
• UL File No. E150057, VDE, EAC

The CSF 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air.

• DIN Mounting
• Fixed Thermostat
• II (double insulated) / IP20
• UL File No. E150057, VDE, EAC

The RCE 016 small heaters have been designed to prevent condensation and to ensure a minimum operating temperature in small enclosures.

• Screw Mounting
• II (double insulated) / IP54
• UL File No. E234324, VDE, EAC