The products below are available right now, we just don't have a page created for them yet. Please contact us for inquiries in the meantime.
Enclosure vents allow passive air to be drawn into an enclosure through a lower vent and out through a higher vent. This helps cools small devices, equalizes pressure, and prevents condensation.
List View
The Saginaw SCE-BVKD is designed for indoor or outdoor applications to handle the large negative pressure differential caused in a tightly sealed enclosure in extreme weather conditions or wash down applications that draw water into the enclosure. Adding a breather vent will equalize this pressure differential. Installed on the bottom of an enclosure as a drain and vent.
The Saginaw SCE-BVK is designed for indoor or outdoor applications to handle the large negative pressure differential caused in a tightly sealed enclosure in extreme weather conditions or wash down applications that draw water into the enclosure. Adding a breather vent will equalize this pressure differential. Installed on the side of your enclosure as a breather or installed on the bottom as a drain and vent.
The Bud Industries IPV-1115 is designed to equalize internal and external temperature and pressure, and to prevent internal condensation. Designed to accept a 60mm x 60mm fan (not included).
The Bud Industries IPV-1116 is designed to equalize internal and external temperature and pressure, and to prevent internal condensation. Designed to accept a 80mm x 80mm fan (not included).
The Stego 28402.0-01 is designed to provide a protected enclosure environment for valuable and crucial components with an IP66 rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.
The Stego 28401.0-00 is designed to provide a protected enclosure environment for valuable and crucial components with an IP66 rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.
The Stego 28401.0-02 is designed to provide a protected enclosure environment for valuable and crucial components with an IP66 rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.
The Stego 08400.9-01 is designed to permit a controlled change in pressure which can be easily installed in any enclosure.
The Hammond SDA412 is designed to permit a controlled change in pressure which can be easily installed in any enclosure.
The Stego 28406.0-00 is designed to provide a protected enclosure environment for valuable and crucial components with a UL 4X rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.
The Stego 28405.0-00 is designed to provide a protected enclosure environment for valuable and crucial components with a UL 4X rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.
The Allied Moulded AMVENT4XLG is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.