The products below are available right now, we just don't have a page created for them yet. Please contact us for inquiries in the meantime.
Enclosure vents allow passive air to be drawn into an enclosure through a lower vent and out through a higher vent. This helps cools small devices, equalizes pressure, and prevents condensation.
List View
The Integra FS-KIT-2 is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.
The Allied Moulded AMVENT4XLG is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.
The Hammond SDV280-1 is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.
The Allied Moulded AMVENTLG is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.
The Bud Industries IPV-67181-B is designed to equalize internal pressure, and to prevent condensation..
The Integra VENT-2 is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.
The Bud Industries IPV-65100-B is designed to allow the enclosure the ability breathe while keeping out water and dust through the use of an oil and checmical resistant e-PTFE membrane.
The Bud Industries IPV-65100-W is designed to allow the enclosure the ability breathe while keeping out water and dust through the use of an oil and checmical resistant e-PTFE membrane.
The Hammond SDV180-1 is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.
The Hammond SDVN4XN2 is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.
The Bud Industries NBX-10911 is designed to equalize internal and external temperature and pressure, and to prevent internal condensation.
The Allied Moulded AMVENTSM is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.