Thermal Regulating & Monitoring

• Dual Fixed Thermostat
• Normally Closed (NC) Switch On: 59 F / 15 C - Switch Off: 77 F / 25 C
  Normally Open (NO) Switch On: 122 F / 50 C - Switch Off: 104 F / 40 C

• Dual Fixed Thermostat
• Normally Closed (NC) Switch On: 59 F / 15 C - Switch Off: 77 F / 25 C
  Normally Open (NO) Switch On: 140 F / 60 C - Switch Off: 122 F / 50 C

The FLZ series of twin thermostats integrates two independently switchable thermostats. They are available with N.C./N.O., N.C./N.C., and N.O./N.O. contacts.

• Dual Adjustable Thermostat
• Setting Range (NO): 0-60 C
  Setting Range (NO): 0-60 C

The FLZ series of twin thermostats integrates two independently switchable thermostats. They are available with N.C./N.O., N.C./N.C., and N.O./N.O. contacts.

• Dual Adjustable Thermostat
• Setting Range (NO): 32-140 F
  Setting Range (NO): 32-140 F

The ZR 011 houses two separate thermostats, allowing the independent control of heating and cooling or other equipment.

• Dual AdjustableThermostat
• Setting Range (NO): 0-60 C
  Setting Range (NO): 0-60 C

• Dual Fixed Thermostat
• Normally Open (NO) Switch On: 122 F / 40 C - Switch Off: 104 F / 50 C
  Normally Open (NO) Switch On: 140 F / 60 C - Switch Off: 122 F / 50 C

The ZR 011 houses two separate thermostats, allowing the independent control of heating and cooling or other equipment.

• Dual AdjustableThermostat
• Setting Range (NO): 32-140 F
  Setting Range (NO): 32-140 F

The Stego EFL 012 series hygrostat is used for controlling heating and cooling equipment, filter fans or signal devices through the Relay SM 010 or a similar device. The hygrostat registers the surrounding relative humidity and can switch a signal current via an internal relay with a potential free change-over contact.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
• Operating Voltage: 12-48 VDC
• Mounting: DIN Rail

The Stego EFR 012 series hygrostat senses the relative humidity in an enclosure and turns on a heater at the set point, helping prevent the formation of condensation in the enclosure.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
• Operating Voltage: 120 VAC
• Mounting: DIN Rail

The Stego DCF 010 series hygrostat with integrated switch module is used to control heating and cooling equipment, filter fans or signal devices through the relay. The hygrostat measures the relative humidity and can switch a signal current via an internal relay. The external sensor can be positioned freely anywhere in the control cabinet for precise measurement of the atmospheric humidity.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
  Temperature Setting: +41 °F (+5 °C) pre-set
• Operating Voltage: 20-56 VDC
• Mounting: DIN Rail

The Stego DCF 010 series hygrostat with integrated switch module is used to control heating and cooling equipment, filter fans or signal devices through the relay. The hygrostat measures the relative humidity and can switch a signal current via an internal relay. The external sensor can be positioned freely anywhere in the control cabinet for precise measurement of the atmospheric humidity.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
  Temperature Setting: +41 °F (+5 °C) pre-set
• Operating Voltage: 20-56 VDC
• Mounting: DIN Rail

The Stego DCF 010 series hygrostat with integrated switch module is used to control heating and cooling equipment, filter fans or signal devices through the relay. The hygrostat measures the relative humidity and can switch a signal current via an internal relay. The external sensor can be positioned freely anywhere in the control cabinet for precise measurement of the atmospheric humidity.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
  Temperature Setting: +41 °F (+5 °C) pre-set
• Operating Voltage: 20-56 VDC
• Mounting: DIN Rail