888-886-8185
8am-5pm PST
Product Category

Ledge U-Handles

Products 13-23 of 23
Filter

List View

J.W. Winco 430-200-EL Aluminum Ledge "U" Handle
Retail: $21.82
Price: $12.87

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195° F.

  • No Holes
  • Finish: Anodized
MFG Part# 430-200-EL
J.W. Winco 430-200-SW Aluminum Ledge "U" Handle
Retail: $21.53
Price: $12.70

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195° F.

  • No Holes
  • Finish: Black
MFG Part# 430-200-SW
J.W. Winco 430-250-EL Aluminum Ledge "U" Handle
Retail: $24.36
Price: $14.37

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195° F.

  • No Holes
  • Finish: Anodized
MFG Part# 430-250-EL
J.W. Winco 430-250-SW Aluminum Ledge "U" Handle
Retail: $23.78
Price: $14.03

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195° F.

  • No Holes
  • Finish: Black
MFG Part# 430-250-SW
J.W. Winco 35W94BGA/C3 Plastic Ledge "U" Handle
Retail: $13.04
Price: $7.69

The J.W.Winco series EN630 design of ledge handles matches the product family of the Ergostyle. A typical application for ledge handles is on double swing doors on machine shrouds or fixtures. The ledge handles are protection for the operator’s fingers. At the same time they shroud the two fixing screws of the ledge handle.

  • Counterbored Through Holes
  • Hole Distance: 93.5 mm
  • Finish: Black
MFG Part# 630-114-A-DGR
J.W. Winco 35W94BGA/C2 Plastic Ledge "U" Handle
Retail: $13.04
Price: $7.69

The J.W.Winco series EN630 design of ledge handles matches the product family of the Ergostyle. A typical application for ledge handles is on double swing doors on machine shrouds or fixtures. The ledge handles are protection for the operator’s fingers. At the same time they shroud the two fixing screws of the ledge handle.

  • Counterbored Through Holes
  • Hole Distance: 93.5 mm
  • Finish: Black
MFG Part# 630-114-A-DOR
J.W. Winco 35W94BGA/C6 Plastic Ledge "U" Handle
Retail: $13.04
Price: $7.69

The J.W.Winco series EN630 design of ledge handles matches the product family of the Ergostyle. A typical application for ledge handles is on double swing doors on machine shrouds or fixtures. The ledge handles are protection for the operator’s fingers. At the same time they shroud the two fixing screws of the ledge handle.

  • Counterbored Through Holes
  • Hole Distance: 93.5 mm
  • Finish: Black
MFG Part# 630-114-A-DRT
J.W. Winco 35W94BGA/C1 Plastic Ledge "U" Handle
Retail: $13.04
Price: $7.69

The J.W.Winco series EN630 design of ledge handles matches the product family of the Ergostyle. A typical application for ledge handles is on double swing doors on machine shrouds or fixtures. The ledge handles are protection for the operator’s fingers. At the same time they shroud the two fixing screws of the ledge handle.

  • Counterbored Through Holes
  • Hole Distance: 93.5 mm
  • Finish: Black
MFG Part# 630-114-A-DSG
J.W. Winco 630-114-B-DGB Plastic Ledge "U" Handle
Retail: $13.04
Price: $7.69

The J.W.Winco series EN630 design of ledge handles matches the product family of the Ergostyle. A typical application for ledge handles is on double swing doors on machine shrouds or fixtures. The ledge handles are protection for the operator’s fingers. At the same time they shroud the two fixing screws of the ledge handle.

  • Counterbored Through Holes
  • Hole Distance: 93.5 mm
  • Finish: Black
MFG Part# 630-114-B-DGB
J.W. Winco 35W94BGB/C1 Plastic Ledge "U" Handle
Retail: $13.04
Price: $7.69

The J.W.Winco series EN630 design of ledge handles matches the product family of the Ergostyle. A typical application for ledge handles is on double swing doors on machine shrouds or fixtures. The ledge handles are protection for the operator’s fingers. At the same time they shroud the two fixing screws of the ledge handle.

  • Counterbored Through Holes
  • Hole Distance: 93.5 mm
  • Finish: Black
MFG Part# 630-114-B-DSG
J.W. Winco 630.1-114-A-DGR Plastic Ledge "U" Handle
Retail: $12.73
Price: $7.51

The J.W.Winco series EN630.1 is an original design technopolymer plastic Ergostyle off-set open "U" Handles. When using guards on machines and automation systems, which include double hinged doors, use of colored caps makes identification of handle easier. Resistant to solvents, oils, grease and other chemical agents.

  • Counterbored Through Holes
  • Hole Distance: 93.5 mm
  • Finish: Black
MFG Part# 630.1-114-A-DGR