888-886-8185
8am-5pm PST
Product Category

120 VAC Polycarbonate Powered Enclosures

Products 1-12 of 32
Filter

List View

Altelix NP141105VA1C-GFI Polycarbonate Electrical Enclosure
Retail: $279.99
Price: $272.46

The Altelix NP141105VA1C-GFI is ideal for protecting equipment from harsh environments and tampering. This enclosure features a fully gasketed door to protect from dust and water ingress. This enclosure features two 3.5 inch air vents. The NP141105VA1C-GFI features a Ground Fault Circuit Interrupter (GFCI) outlet. Like a circuit breaker, this outlet shuts off electric power when it senses an imbalance between the outgoing and incoming current. They are ideal in locations where water may be present since they provide an extra level of protection from electrical shock.

  • Hinged (Single Door)
  • Wall Mount
  • Color: Gray
  • NEMA Type 3R & 3RX
MFG Part# NP141105VA1C-GFI
Altelix NP141105VFA1C-DIN Polycarbonate Electrical Enclosure
Retail: $299.99
Price: $291.92

The Altelix NP141105VFA1C-DIN is ideal for protecting DIN rail mounted equipment from harsh environments and tampering. Included with this enclosure are (2) 9" long 20 gauge steel 35mm top hat DIN rails. They easily attached to the 2.0mm thick aluminum equipment mounting plate included with the enclosure. Hardware for mounting the DIN rails and equipment mounting plate is included. It features dual 3" vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C).

  • Hinged (Single Door)
  • Wall Mount
  • Color: Gray
  • NEMA Type 3R & 3RX
MFG Part# NP141105VFA1C-DIN
Altelix NP141105VA1C Polycarbonate Electrical Enclosure
Retail: $214.99
Price: $209.20

The Altelix NP141105VA1C is ideal for protecting equipment from harsh environments and tampering. This enclosure features two 3 inch air vents. Rain shields help prevent rain water from entering the enclosure. This configuration consists of the PC+ABS NEMA enclosure with hinged lid and a 2.0mm thick aluminum plate with two 120VAC power outlets. A 5 foot pre-wired power cord is included to power the enclosure, so no additional wiring is required. A ground lug is provided on the side of the enclosure.

  • Hinged (Single Door)
  • Wall Mount
  • Color: Gray
  • NEMA Type 3 & 3RX
MFG Part# NP141105VA1C
Altelix NP141105VFA1C-GFI Polycarbonate Electrical Enclosure
Retail: $349.99
Price: $340.57

The Altelix NP141105VFA1C-GFI or protecting equipment from harsh environments and tampering. This enclosure features a fully gasketed door to protect from dust and water ingress. This enclosure features two 3.5 inch air vents and thermostat controlled cooling fan. The NP141105VA1C-GFI features a Ground Fault Circuit Interrupter (GFCI) outlet. Like a circuit breaker, this outlet shuts off electric power when it senses an imbalance between the outgoing and incoming current. They are ideal in locations where water may be present since they provide an extra level of protection from electrical shock.

  • Hinged (Single Door)
  • Wall Mount
  • Color: Gray
  • NEMA Type 3R & 3RX
MFG Part# NP141105VFA1C-GFI
Altelix 14x11x5" Polycarbonate Enclosure with 120V Power | NP141105BA1C
Price: $117.99

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

  • Polycarbonate Material
  • 120 VAC Outlets
  • Pre-Wired Power Cord
  • UL94-V0 Flame Rating
MFG Part# NP141105BA1C
Altelix 14x11x5" Polycarbonate Enclosure with 120V Power | NP141105GA1C
Retail: $169.99
Price: $165.42

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

  • Polycarbonate Material
  • 120 VAC Outlets
  • Pre-Wired Power Cord
  • UL94-V0 Flame Rating
MFG Part# NP141105GA1C
Altelix 14x11x5" Polycarbonate Enclosure with 120V Power | NP141105RA1C
Retail: $169.99
Price: $165.42

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

  • Polycarbonate Material
  • 120 VAC Outlets
  • Pre-Wired Power Cord
  • UL94-V0 Flame Rating
MFG Part# NP141105RA1C
Altelix 14x11x5" Polycarbonate Enclosure with 120V Power | NP141105YA1C
Retail: $169.99
Price: $165.42

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

  • Polycarbonate Material
  • 120 VAC Outlets
  • Pre-Wired Power Cord
  • UL94-V0 Flame Rating
MFG Part# NP141105YA1C
Altelix 14x11x5" Polycarbonate Enclosure with Cooling Fan & 120V Power | NP141105BVFA1C
Price: $233.99

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

  • Polycarbonate Material
  • Built-In Cooling Fan
  • 120 VAC Outlets
  • Pre-Wired Power Cord
  • UL94-V0 Flame Rating
MFG Part# NP141105BVFA1C
Altelix 14x11x5" Polycarbonate Enclosure with Cooling Fan & 120V Power | NP141105BVFA1C-IN
Price: $169.99

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

  • Polycarbonate Material
  • Built-In Cooling Fan
  • 120 VAC Outlets
  • Pre-Wired Power Cord
  • UL94-V0 Flame Rating

DiscontinuedSee alternative option NP141105BVFA1C

MFG Part# NP141105BVFA1C-IN
Altelix 14x11x5" Polycarbonate Enclosure with Cooling Fan & 120V Power | NP141105GVFA1C
Retail: $274.99
Price: $267.59

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

  • Polycarbonate Material
  • Built-In Cooling Fan
  • 120 VAC Outlets
  • Pre-Wired Power Cord
  • UL94-V0 Flame Rating
MFG Part# NP141105GVFA1C
Altelix 14x11x5" Polycarbonate Enclosure with Cooling Fan & 120V Power | NP141105TVFA1C
Retail: $233.99
Price: $227.69

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

  • Polycarbonate Material
  • Built-In Cooling Fan
  • 120 VAC Outlets
  • Pre-Wired Power Cord
  • UL94-V0 Flame Rating
MFG Part# NP141105TVFA1C