888-886-8185
8am-5pm PST
Product Category

Enclosure Ventilation

Products 1-12 of 20
Filter

List View

Saginaw SCE-BVKD Breather Vent/Drain Kit
Retail: $10.93
Price: $10.87

The Saginaw SCE-BVKD is designed for indoor or outdoor applications to handle the large negative pressure differential caused in a tightly sealed enclosure in extreme weather conditions or wash down applications that draw water into the enclosure. Adding a breather vent will equalize this pressure differential. Installed on the bottom of an enclosure as a drain and vent.

  • Corrosion proof
  • UV resistant
  • Drain & vent applicaition
  • Bottom mount
MFG Part# SCE-BVKD
Saginaw SCE-BVK Breather Vent/Drain Kit
Retail: $23.95
Price: $23.81

The Saginaw SCE-BVK is designed for indoor or outdoor applications to handle the large negative pressure differential caused in a tightly sealed enclosure in extreme weather conditions or wash down applications that draw water into the enclosure. Adding a breather vent will equalize this pressure differential. Installed on the side of your enclosure as a breather or installed on the bottom as a drain and vent.

  • Corrosion proof
  • UV resistant
  • Drain & vent applicaition
  • Side/bottom mount
MFG Part# SCE-BVK
Bud Industries IPV-1115 Polycarbonate Vent Kit
Price: $7.90

The Bud Industries IPV-1115 is designed to equalize internal and external temperature and pressure, and to prevent internal condensation. Designed to accept a 60mm x 60mm fan (not included).

  • Polycarbonate
  • Sold Individually
  • Housing, gasket, and locking nut included
MFG Part# IPV-1115
Bud Industries IPV-1115 Polycarbonate Vent Kit
Price: $7.20

The Bud Industries IPV-1116 is designed to equalize internal and external temperature and pressure, and to prevent internal condensation. Designed to accept a 80mm x 80mm fan (not included).

  • Polycarbonate
  • Sold Individually
  • Housing, gasket, and locking nut included
MFG Part# IPV-1116
Stego 28402.0-01 Stainless Steel Vent Kit
Price: $43.60

The Stego 28402.0-01 is designed to provide a protected enclosure environment for valuable and crucial components with an IP66 rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.

  • IP66 Protection
  • Sold Individually
  • Air Permeability 120 liters/hr
  • Stainless Steel
MFG Part# 28402.0-01
Stego 28401.0-00 Stainless Steel Vent Kit
Price: $161.53
review-star review-star review-star review-star review-star
(1)

The Stego 28401.0-00 is designed to provide a protected enclosure environment for valuable and crucial components with an IP66 rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.

  • IP66 Protection
  • Sold Individually
  • Air Permeability 1200 liters/hr
  • 303 Stainless Steel
MFG Part# 28401.0-00
Stego 28401.0-00 Stainless Steel Vent Kit
Price: $215.08

The Stego 28401.0-02 is designed to provide a protected enclosure environment for valuable and crucial components with an IP66 rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.

  • IP66 Protection
  • Sold Individually
  • Air Permeability 1200 liters/hr
  • 316 Stainless Steel
MFG Part# 28401.0-02
Stego 08400.9-01 Plastic Vent Kit
Price: $9.44

The Stego 08400.9-01 is designed to permit a controlled change in pressure which can be easily installed in any enclosure.

  • IP55 Protection
  • Set of Two Plugs
  • Plastic
MFG Part# 08400.9-01
Hammond SDA412 Plastic Vent Kit
Retail: $11.85
Price: $9.62

The Hammond SDA412 is designed to permit a controlled change in pressure which can be easily installed in any enclosure.

  • IP45 Protection
  • Sold Individually
  • Plastic
MFG Part# SDA412
Stego 28406.0-00 Plastic Vent Kit
Price: $12.60
review-star review-star review-star review-star review-star
(1)

The Stego 28406.0-00 is designed to provide a protected enclosure environment for valuable and crucial components with a UL 4X rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.

  • NEMA 4X/IP66
  • Air Permeability 120 liters/hr
  • Waterproof Membrane
  • Set of Two Plugs
  • Plastic
MFG Part# 28406.0-00
Stego 28405.0-00 Plastic Vent Kit
Price: $23.53

The Stego 28405.0-00 is designed to provide a protected enclosure environment for valuable and crucial components with a UL 4X rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.

  • NEMA 4X/IP66
  • Air Permeability 1200 liters/hr
  • Waterproof Membrane
  • Set of Two Plugs
  • Plastic
MFG Part# 28405.0-00
Allied Moulded AMVENT4XLG Polycarbonate Vent Kit
Retail: $43.06
Price: $35.31

The Allied Moulded AMVENT4XLG is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.

  • NEMA 4X Protection Rating
  • Set of Two Vents
  • Polycarbonate
MFG Part# AMVENT4XLG