304 Stainless Steel Enclosures

The Hammond EN4SD202012SS is designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Hammond EN4SD202012WSS is designed to enclose electrical and/or electronic equipment in wallmount applications where viewing of component operation is necessary while maintaining protection NEMA Ratings.

• Hinged (Single Door) Dimensions (H x W x D)20 x 20 x 12"NEMA Type3R, 4, 4X, 12 and 13Material304 SSInner PanelSold SeparatelyDoor DesignHinged (Single Door)Locking FeatureQuarter TurnMountingFeetFinishBrushedStandardsUL, CSA, IEC, RoHSConstructionFormed 16 gauge 304 stainless steelFull view UV resistant polycarbonate window allows maximum viewing area of inner panelContinuously welded seams ground smoothFormed lip on enclosure to exclude flowing liquids and contaminantsSeamless poured-in place gasketDownloadsData...
  -->

The Hammond HWST202012SS is designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.

• Hinged (Single Door)
• Wall
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Hammond ST202012SS is designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Saginaw SCE-20C20ELJ is designed to house electrical and electronic controls, instruments, and components. Provides protection from dust, dirt, oil and water. Consolets can be mounted on either of two sides to give a control surface inclined at 30?or 60? degrees. Can be mounted on desks, machines, or pedestals.

• Hinged (Single Door)
• Other
• ANSI 61- Gray
• NEMA Type 3R, 4, 12 and 13

The Saginaw Control & Engineering SCE-20EL2006SSLP is designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions.

• Opaque/Solid
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-20H2006SSLP is designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Hammond 1418N4SSD6 is designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Hammond EN4SD20206SS is designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Hammond EN4SD20206WSS is designed to enclose electrical and/or electronic equipment in wallmount applications where viewing of component operation is necessary while maintaining protection NEMA Ratings.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-20EL2008SSLP is designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions.

• Opaque/Solid
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-20EL2008SSST is designed to house electrical and electronic controls, instrumentation and components in indoor, outdoor and sanitary locations.

• Hinged (Single Door)
• Wall
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13