The Altelix NP141105VFD2 is ideal for protecting equipment from harsh environments and tampering. This enclosure features a terminal strip and ground lug for simplified wiring on-site. The pre-installed PG16 cable gland is designed for use with a much wider range cable types and will seal against cable much thinner then a typical PG16 cable gland. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100?F and turns off when it drops to 79?F.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Altelix NP141105VFD4 is ideal for protecting equipment from harsh environments and tampering. This enclosure features a terminal strip and ground lug for simplified wiring on-site. The pre-installed PG16 cable gland is designed for use with a much wider range cable types and will seal against cable much thinner then a typical PG16 cable gland. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100?F and turns off when it drops to 79?F.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Altelix NP141105V features two 3 inch air vents covered by rain shields, with cleanable screens. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries. Moulded out of UV resistant PC+ABS, a high thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Altelix NP141105VP features two 3 inch air vents covered by rain shields, with cleanable screens. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries. Moulded out of UV resistant PC+ABS, a high thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. 2mm thick aluminum mounting plate included.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Altelix NP141105T is a Ivory Polycarbonate + ABS enclosure ideal for protecting equipment from harsh enviornments and tampering.

• Hinged (Single Door)
• Tamper-Proof Screw Lock
• Color: Ivory
• NEMA: 3, 3R, 4, 4X

The Altelix NP141105TV is a Ivory Polycarbonate + ABS enclosure ideal for protecting equipment from harsh enviornments and tampering.

• Hinged (Single Door)
• Tamper-Proof Screw Lock
• Color: Ivory
• NEMA: 3, 3R, 4, 4X

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Polycarbonate Material
• 120 VAC Outlets
• Pre-Wired Power Cord
• UL94-V0 Flame Rating

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Polycarbonate Material
• 120 VAC Outlets
• Pre-Wired Power Cord
• UL94-V0 Flame Rating

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Polycarbonate Material (Tan)
• 120 VAC Outlets
• Pre-Wired Power Cord
• UL94-V0 Flame Rating

The Altelix NP141105VFA1C-GFI or protecting equipment from harsh environments and tampering. This enclosure features a fully gasketed door to protect from dust and water ingress. This enclosure features two 3.5 inch air vents and thermostat controlled cooling fan. The NP141105VA1C-GFI features a Ground Fault Circuit Interrupter (GFCI) outlet. Like a circuit breaker, this outlet shuts off electric power when it senses an imbalance between the outgoing and incoming current. They are ideal in locations where water may be present since they provide an extra level of protection from electrical shock.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Polycarbonate Material
• Built-In Cooling Fan
• 120 VAC Outlets
• Pre-Wired Power Cord
• UL94-V0 Flame Rating

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Polycarbonate Material
• Built-In Cooling Fan
• 120 VAC Outlets
• Pre-Wired Power Cord
• UL94-V0 Flame Rating