Electrical Enclosures

The Altelix NP171406VMA1C is a vented polycarbonate + ABS NEMA weatherproof enclosure with 120VAC power and aluminum equipment plate is ideal for protecting equipment from harsh environments and tampering. This enclosure features a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use. Internal and external electrical ground points are also provided.

• Hinged (Single Door)
• Includes PVC Back Panel and 120V Outlets
• Wall Mount
• Color: Gray
• NEMA Type 3 & 3X

The Altelix NP171406GVA1C is a vented polycarbonate + ABS NEMA weatherproof enclosure with 120VAC power and aluminum equipment plate is ideal for protecting equipment from harsh environments and tampering. This enclosure features a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use. Internal and external electrical ground points are also provided.

• Hinged (Single Door)
• Wall Mount
• Color: Green
• NEMA Type 3 & 3X

The Altelix NP171406V features two 3 inch air vents covered by rain shields, with cleanable screens. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries. Moulded out of UV resistant PC+ABS, a high thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Altelix NP171406VP features two 3 inch air vents covered by rain shields, with cleanable screens. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries. Moulded out of UV resistant PC+ABS, a high thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. 2mm thick aluminum mounting plate included.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Altelix NP17AVGY-2SA is a weatherproof fan-cooled enclosure designed to provide indoor or outdoor protection for a wide range of Audio/Video and Network devices such as the SONOS Port, Apple Mac mini, Amazon Echo Link Amp, Control4 EA-3 Controller (C4-EA3 and C4-EA3-V2), Crestron MC3 3-Series Control System, & Bluesound Powernode Streaming Amplifier.

• Adjustable universal equipment mounting brackets
• Durable polycarbonate + ABS construction
• Thermostat controlled cooling fan
• Dual vents with raid shrouds
• (2) 120 VAC power outlets with USB-A & USB-C ports
• Tamper-proof locking screw w/key
• Pre-wired 5 ft power cord
• NEMA Type 3R, 3RX for outdoor use

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Polycarbonate Material
• Built-In Cooling Fan
• 120 VAC Outlets
• Pre-Wired Power Cord
• UL94-V0 Flame Rating

The Altelix NP series are ideal for protecting equipment from harsh enviornments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Polycarbonate Material
• Built-In Cooling Fan
• 120 VAC Outlets
• Includes Aluminum Back Panel
• Pre-Wired Power Cord
• UL94-V0 Flame Rating

The Altelix NP series are ideal for protecting equipment from harsh environments and tampering. These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. These rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Polycarbonate Material
• Built-In Cooling Fan
• 4 x 120 VAC Outlets
• Includes Aluminum Back Panel
• Pre-Wired Power Cord
• UL94-V0 Flame Rating

The Saginaw Control & Engineering SCE-16147CHQRFG is designed for indoor or outdoor use to house electrical and electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-1614FG is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-1614FW is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents and require unrestricted viewing of gauges or controls.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Bud Industries DPH-28712-C is a wall mounting enclosure that's designed for outdoor use. It features an impact and corrosion resistant build. Includes a stainless steel latch with an area for padlock.

• Hinged (Single Door) Cover
• Feet Mounting
• Light Gray
• NEMA Type 4, 4X, 6, 6P, 12 and 13