Electrical Enclosures

The Saginaw Control & Engineering SCE-1816FW is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents and require unrestricted viewing of gauges or controls.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-20EL2010SSLP is designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions.

• Opaque/Solid
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Hammond EN4SD202010SS is designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Hammond EN4SD202010WSS is designed to enclose electrical and/or electronic equipment in wallmount applications where viewing of component operation is necessary while maintaining protection NEMA Ratings.

• Hinged (Single Door) Dimensions (H x W x D)20 x 20 x 10"NEMA Type3R, 4, 4X, 12 and 13Material304 SSInner PanelSold SeparatelyDoor DesignHinged (Single Door)Locking FeatureQuarter TurnMountingFeetFinishBrushedStandardsUL, CSA, IEC, RoHSConstructionFormed 16 gauge 304 stainless steelFull view UV resistant polycarbonate window allows maximum viewing area of inner panelContinuously welded seams ground smoothFormed lip on enclosure to exclude flowing liquids and contaminantsSeamless poured-in place gasketDownloadsData...
  -->

The Saginaw Control & Engineering SCE-20EL2010SS6LP is designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Hammond EN4SD202010S16 is designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wall mount applications.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA

The Saginaw Control & Engineering SCE-202010ELJ is designed to house electrical controls, instruments and components in areas, which may be regularly hosed down or are in very wet or oily conditions. Provides protection from dust, dirt, oil, and water.

• Hinged (Single Door)
• Mounting Feet
• ANSI 61 - Gray
• NEMA Type 3R, 4, 12 and 13

The Saginaw Control & Engineering SCE-20EL2010LP is designed to house electrical and electronic controls, instruments and components. Provides protection from dust, oil and water.

• Hinged (Single Door)
• Feet
• ANSI 61 Gray
• NEMA Type 3R, 4, 12 and 13

The Saginaw Control & Engineering SCE-20EL2010LPLG is designed to house electrical and electronic controls, instruments and components. Provides protection from dust, oil and water.

• Hinged (Single Door)
• Wall
• RAL 7035 Light Gray
• NEMA Type 3R, 4, 12 and 13

The Saginaw Control & Engineering SCE-20H2010LP is designed to house electrical and electronic controls, instruments and components. Provides protection from dust, oil and water.

• Hinged (Single Door)
• Feet
• ANSI 61 Gray
• NEMA Type 3R, 4, 12 and 13

The Saginaw Control & Engineering SCE-20N2010LP is designed to house electrical controls, instruments and components in areas that do not require oil, water and dust tight protection.

• Hinged (Single Door)
• Pre-drilled mounting holes (flange mounts sold separately)
• ANSI 61 Gray
• NEMA Type 1

The Hammond C3RMC202010 is designed for outdoor housing of metering transformers.

• Hinged (Single Door)
• Wall
• ANSI 61 Gray
• NEMA Type 3R