Electrical Enclosures

The Altelix NS282416VFA1R2C-R6U is a weatherproof NEMA rated enclosure ideal for protecting rack equipment from harsh environments and tampering.

• 6U Adjustable Depth Rack Mount
• 18 Gauge Steel Material
• Built-In Cooling Fans
• 120 VAC Outlets
• Pre-Wired Power Cord

The Altelix NS282424A1C-AZ-R6U is a air conditioned metal enclosure with a 6U Rack and digital temp control and 120VAC outlets for harsh environments, ideal for outdoor sensitive electronics protection.

• Built‑in 800 BTU AC & 520W Heater
• 6U Rack
• Pre-Wired 120VAC Outlets
• NEMA 4, 4X

The Altelix NS282424A1C-AZ-R8U is a air conditioned metal enclosure with a 8U Rack and digital temp control and 120VAC outlets for harsh environments, ideal for outdoor sensitive electronics protection.

• Built‑in 800 BTU AC & 520W Heater
• 8U Rack
• Pre-Wired 120VAC Outlets
• NEMA 4, 4X

The Altelix NS282424A1C-AZ is a air conditioned metal enclosure with digital temp control and 120VAC outlets for harsh environments, ideal for outdoor sensitive electronics protection.

• Built‑in 800 BTU AC & 520W Heater
• Pre-Wired 120VAC Outlets
• NEMA 4, 4X

The Saginaw Control & Engineering SCE-29VR2412 is designed to house electrical controls, drives, instruments and components used in an outdoor environment to provide a degree of protection for the equipment inside the enclosure against ingress falling dirt, rain, sleet and snow.

• Hinged (Single Door)
• Flange
• Powder Coated White
• NEMA Type 3R

The Saginaw Control & Engineering SCE-29VR2416 is designed to house electrical controls, drives, instruments and components used in an outdoor environment to provide a degree of protection for the equipment inside the enclosure against ingress falling dirt, rain, sleet and snow.

• Hinged (Single Door)
• Flange
• Powder Coated White
• NEMA Type 3R

The Hammond 2CSD24R is designed as an economical housing for operator interface applications, providing an ideal sloped surface for mounting keyboards, switches, indicator lights, and/or dials.

• Hinged (Single Door)
• Base
Dimensions (H x W x D)28.5 x 24 x 16.63"NEMA Type4Material304 SSInner PanelNot SupportedDoor DesignHinged (Single Door)Locking FeatureQuarter TurnMountingBaseFinishBrushedStandardsUL, CSA, IEC, RoHSConstruction14 gauge 304 stainless steel bodies with 14 gauge 304 stainless steel front and rear doorsFeatures solid sides and top, 2 solid doors on front (both open downlower, smaller door for keyboard shelf) and back (opens up), and open bottomLower drop down door provides access to optional...
-->

The Hammond 2CLD24R is designed as an economical housing for operator interface applications, providing an ideal sloped surface for mounting keyboards, switches, indicator lights, and/or dials.

• Hinged (Single Door)
• Base
Dimensions (H x W x D)28.5 x 24 x 16.63"NEMA Type4MaterialMetalInner PanelNot SupportedDoor DesignHinged (Single Door)Locking FeatureQuarter TurnMountingBaseFinishRAL 7035 GrayStandardsUL, CSA, IEC, RoHSConstructionFormed 14 gauge steel bodies with 14 gauge steel front and rear doorsFeatures solid sides and top, 2 solid doors on front (both open downlower, smaller door for keyboard shelf) and back (opens up), and open bottomLower drop down door provides access to optional slide-out keyboard...
-->

The Hammond 1427NCG series liquid-tight cable glands are used to seal cable entries, keep contaminants from entering enclosures, provide strain relief and thus reduce stress on components and termination points inside enclosures.

• Single Unit
• Clamping Range: 4 to 8 mm
• Rating: IP68
• Color: Gray
• Standards: UL, RoHS

The Hammond 1550Q is a rugged diecast aluminum enclosure finished in a natural vibra finish for a smooth surface with no sharp edges. Includes stainless steel philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP54 and does not include a gasket.

• IP54 Rated
• No Gasket Included
• Lift-Off Door
• Natural Finish

The Hammond 1550QBK is a rugged diecast aluminum enclosure painted with a tough satin black polyester powder paint for a long lasting finish even after machining. Includes black philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP54 and does not include a gasket.

• IP54 Rated
• No Gasket Included
• Lift-Off Door
• Powder Coated Black

The Hammond 1550WQ is a rugged diecast aluminum enclosure finished in a natural vibra finish for a smooth surface with no sharp edges. Includes stainless steel philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP66 when the included water tight gasket is installed.

• IP66 Rated
• IP66 Gasket Included
• Lift-Off Door
• Natural Finish