Electrical Enclosures

The Hammond EN4SD302410SS is designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Hammond EN4SD302410WSS is designed to enclose electrical and/or electronic equipment in wallmount applications where viewing of component operation is necessary while maintaining protection NEMA Ratings.

• Hinged (Single Door) Dimensions (H x W x D)30 x 24 x 10"NEMA Type3R, 4, 4X, 12 and 13Material304 SSInner PanelSold SeparatelyDoor DesignHinged (Single Door)Locking FeatureQuarter TurnMountingFeetFinishBrushedStandardsUL, CSA, IEC, RoHSConstructionFormed 14 gauge 304 stainless steelFull view UV resistant polycarbonate window allows maximum viewing area of inner panelContinuously welded seams ground smoothFormed lip on enclosure to exclude flowing liquids and contaminantsSeamless poured-in place gasketDownloadsData...
  -->

The Hammond HW302410SSHK is designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA Ty

The Saginaw Control & Engineering SCE-30EL2410SS6LP is designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Hammond 1418N4S16K10 is designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.

• Hinged (Single Door)
• Feet
• Brushed Dimensions (H x W x D)30 x 24 x 10"NEMA Type3R, 4, 4X, 12, and 13Material316 SSInner PanelIncludedDoor DesignHinged (Single Door)Locking FeatureClampMountingFeetFinishBrushedStandardsUL, CSA, IEC, RoHSConstructionFormed 14 gauge 316 stainless steelSmooth, continuously welded seams without knockouts, cutouts or holesWelded brackets provide for enclosure mountingFormed lip on door and enclosure excludes flowing liquids and contaminantsSeamless poured-in place gasketDownloadsData SheetDrawingNEMA...
  -->

The Hammond EN4SD302410S16 is designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wall mount applications.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA

The Hammond HW302410S16HK is designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA T

The Allied Moulded AM30240RL is designed to insulate and house electrical and electronic controls, instruments or components for indoor and outdoor applications.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 4, 4X, 12 and 13

The Allied Moulded AM30240RQT is designed to insulate and house electrical and electronic controls, instruments or components for indoor and outdoor applications.

• Hinged (Single Door) w/Quarter Turn Latches
• Feet
• RAL 7035 - Gray
• NEMA Type 4, 4X, 12 and 13

The Allied Moulded AM30240RT is designed to insulate and house electrical and electronic controls, instruments or components for indoor and outdoor applications.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 4, 4X, 12 and 13

The Allied Moulded AM30240RLW is designed to insulate and house electrical and electronic controls, instruments or components for indoor and outdoor applications.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 4, 4X, 12 and 13

The Allied Moulded AM30240RTW is designed to insulate and house electrical and electronic controls, instruments or components for indoor and outdoor applications.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 4, 4X, 12 and 13