Electrical Enclosures

Integra DIN6-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 4.5" and includes mounting screws. The pre-cut size is designed to mount within all 6" wide Integra polycarbonate enclosures.

• Dims: 4.5 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN5-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 4.88" and includes mounting screws. The pre-cut size is designed to mount within all 5" wide Integra polycarbonate enclosures.

• Dims: 4.88 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN6 is a set of 35mm slotted DIN rail, pre-cut to a length of 4.88" and includes mounting screws. The pre-cut size is designed to mount within all 6" wide Integra polycarbonate enclosures.

• Dims: 4.88 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN8 is a set of 35mm slotted DIN rail, pre-cut to a length of 6.75" and includes mounting screws. The pre-cut size is designed to mount within all 8" wide Integra polycarbonate enclosures.

• Dims: 6.75 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN8-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 6.75" and includes mounting screws. The pre-cut size is designed to mount within all 8" wide Integra polycarbonate enclosures.

• Dims: 6.75 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN10 is a set of 35mm slotted DIN rail, pre-cut to a length of 8.75" and includes mounting screws. The pre-cut size is designed to mount within all 10" wide Integra polycarbonate enclosures.

• Dims: 35mm x 7mm x 8.75" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

The Altelix DRS-NS08 is a 35mm slotted DIN rail, pre-cut to a length of 6.2" and includes mounting screws.

• 6.2" Length
• Slotted top hat 35mm DIN rail design
• 20 Gauge Steel

The Hammond 1418WFHP panel rails provides Hammond 72x24" enclosures with 19 or 24" rack mounting capability.

• 35U
• 10 Gauge Steel, Powder Coated White
• Drilled and tapped 10-32 to EIA spacing of 0.5" - 0.63" - 0.63" - 0.5".

The Saginaw Control & Engineering SCE-35VR2412 is designed to house electrical controls, drives, instruments and components used in an outdoor environment to provide a degree of protection for the equipment inside the enclosure against ingress falling dirt, rain, sleet and snow.

• Hinged (Single Door)
• Flange
• Powder Coated White
• NEMA Type 3R

The Saginaw Control & Engineering SCE-36H1606LP is designed to house electrical and electronic controls, instruments and components. Provides protection from dust, oil and water.

• Hinged (Single Door)
• Feet
• ANSI 61 Gray
• NEMA Type 3R, 4, 12 and 13

The Hammond HCT362011H is designed for use as Current Transformer Cabinet to house and protect instrument current transformers in outdoor applications.

• Lift-Off
• Wall
• ANSI 61 Gray
• NEMA Type 3R

The Saginaw Control & Engineering SCE-36EL2410SSLP is designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions.

• Opaque/Solid
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13