Electrical Enclosures

The Fibox L 43 II inspection window maintains a NEMA 4X protection rating while permitting viewing access to readouts and controls from within enclosures that are locked close.

• Smoked Transparent Cover
• NEMA 4X, IP 65 Rated
• Polycarbonate
• NEMA 4X

The Hammond FKIT316ST12 is designed for washdown applications where enclosures need to be raised 12" above the floor.

• Fixed 12" Height
• Set of 2 Standss
• 316L Stainess Steel

The Allied Moulded AMHMI120CCH HMI Cover Kit is used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• 100% UVA Blocking
• Hinged Clear Cover with 2 Screws
• RAL 7035 Gray
• NEMA 4X

The Allied Moulded AMHMI120CCHTP HMI Cover Kit is used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• 100% UVA Blocking
• Hinged Clear Cover with T25 Tamper Proof Screws
• RAL 7035 Gray
• NEMA 4X

The Allied Moulded AMHMI120CCL HMI Cover Kit is used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• 100% UVA Blocking
• Hinged Clear Cover with Metal Snap Latches
• RAL 7035 Gray
• NEMA 4X

The Allied Moulded AMHMI120H HMI Cover Kit is used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• 100% UVA Blocking
• Hinged Solid Cover with 2 Screws
• RAL 7035 Gray
• NEMA 4X

The Allied Moulded AMHMI120HTP HMI Cover Kit is used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• 100% UVA Blocking
• Hinged Solid Cover with T25 Tamper Proof Screws
• RAL 7035 Gray
• NEMA 4X

The Allied Moulded AMHMI120L HMI Cover Kit is used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• 100% UVA Blocking
• Hinged Solid Cover with Metal Snap Latches
• RAL 7035 Gray
• NEMA 4X

The Hammond PJHMI1210CCH is an 12x10" HMI Cover Kit used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• Clear Cover, Hinged w/Screws
• Formed-In-Place (FIP) polyurethane gasket
• Polycarbonate, Stainelss Steel Hardware
• 100% UV Stabalized
• NEMA 1, 3, 3R, 4, 4X, 12 or 13

The Hammond PJHMI1210CCHTP is an 12x10" HMI Cover Kit used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• Clear Cover, Hinged w/Tamper-Proof Screws
• Formed-In-Place (FIP) polyurethane gasket
• Polycarbonate, Stainelss Steel Hardware
• 100% UV Stabalized
• NEMA 1, 3, 3R, 4, 4X, 12 or 13

The Hammond PJHMI1210CCL is an 12x10" HMI Cover Kit used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• Clear Cover, Hinged w/Screws
• Formed-In-Place (FIP) polyurethane gasket
• Polycarbonate, Stainelss Steel Hardware
• 100% UV Stabalized
• NEMA 1, 3, 3R, 4, 4X, 12 or 13

The Hammond PJHMI1210H is an 12x10" HMI Cover Kit used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• Opaque Cover, Hinged w/Screws
• Formed-In-Place (FIP) polyurethane gasket
• Polycarbonate, Stainelss Steel Hardware
• 100% UV Stabalized
• NEMA 1, 3, 3R, 4, 4X, 12 or 13