Enclosure Back Panels

The Hammond 1427NCG series liquid-tight cable glands are used to seal cable entries, keep contaminants from entering enclosures, provide strain relief and thus reduce stress on components and termination points inside enclosures.

• Single Unit
• Clamping Range: 5 to 10 mm
• Rating: IP68
• Color: Black
• Standards: UL, RoHS

The Hammond 1427NCG series liquid-tight cable glands are used to seal cable entries, keep contaminants from entering enclosures, provide strain relief and thus reduce stress on components and termination points inside enclosures.

• Single Unit
• Clamping Range: 4 to 8 mm
• Rating: IP68
• Color: Gray
• Standards: UL, RoHS

The Hammond 14R0909SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• 304 SS Material
• Thickness: 0.07
• Finish: Brushed
• Compatible with Hammond Manufacturing 1414 and EJ series enclosures.

The Hammond 14R0907SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• 304 SS Material
• Thickness: 0.07
• Finish: Brushed
• Compatible with Hammond Manufacturing 1414, EJ, HJ and PJ series enclosures.

The Hammond 14R1109SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• 304 SS Material
• Thickness: 0.07
• Finish: Brushed
• Compatible with Hammond Manufacturing 1414, EJ, HJ and PJ series enclosures.

The Hammond 14R1111SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• 304 SS Material
• Thickness: 0.07
• Finish: Brushed
• Compatible with Hammond Manufacturing 1414 and EJ series enclosures.

The Hammond 14R1311SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• 304 SS Material
• Thickness: 0.07
• Finish: Brushed
• Compatible with Hammond Manufacturing 1414, EJ, HJ and PJ series enclosures.

The Hammond 14R1513SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• 304 SS Material
• Thickness: 0.07
• Finish: Brushed
• Compatible with Hammond Manufacturing 1414, EJ, HJ and PJ series enclosures.

The Hammond 14R0503SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• 304 SS Material
• Thickness: 0.07
• Finish: Brushed
• Compatible with Hammond Manufacturing 1414 and EJ series enclosures.

The Hammond 14R0505SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• 304 SS Material
• Thickness: 0.07
• Finish: Brushed
• Compatible with Hammond Manufacturing 1414, EJ, HJ and PJ series enclosures.

The Hammond 14R0705SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• 304 SS Material
• Thickness: 0.07
• Finish: Brushed
• Compatible with Hammond Manufacturing 1414, EJ, HJ and PJ series enclosures.

The Hammond 14R0707SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• 304 SS Material
• Thickness: 0.07
• Finish: Brushed
• Compatible with Hammond Manufacturing 1414 and EJ series enclosures.