Enclosure Heating

The CS 028 / CSL 028 fan heaters prevent formation of condensation and provide an evenly distributed interior air temperature in enclosures.

• Screw Mounting
• II (double insulated) / IP20
• Ul File No. E234324, EAC

The FLH radiant heaters are used in combination with a thermostat or hygrostat, predominantly for the avoidance of excessively low temperatures or excessively high humidity in the control cabinet.

• DIN Mounting
• I / IP20
• UL, cUL, CE

The Hammond 14A1111 back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Aluminum Material
• Thickness: 0.08
• Finish: Natural
• Compatible with Hammond Manufacturing 1414, EJ, HJ and PJ series enclosures.

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature must be maintained above a minimum value.

• DIN Mounting
• I (grounded) / IP20
• UL File No. E150057, VDE, EAC

The CR 027 fan heater prevents the formation of condensation and ensures an even temperature in enclosures. The integrated thermostat is used to set the desired temperature while the high performance axial fan provides forced air circulation.

• 20 CFM
• DIN Mounting
• Adjustable Thermostat
• II (double insulated) / IP20
• UL File No. E204590, VDE, EAC

Compact convection heater of temperature class T3 (392 ?F / 200 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T3
• DIN Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Compact convection heater of temperature class T4 (275 ?F / 135 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T4
• DIN Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Compact convection heater of temperature class T5 (212 ?F / 100 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T5
• DIN and Screw Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Compact convection heater of temperature class T3 (392 ?F / 200 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T3
• DIN Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Compact convection heater of temperature class T4 (275 ?F / 135 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T4
• DIN Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Compact convection heater of temperature class T5 (212 F / 100 C max) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T5
• DIN and Screw Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Altelix NHH050W-DIN-KIT is a compact DIN-rail enclosure heater kit that plugs directly into a standard outlet—no hardwiring required—helping prevent condensation and maintain stable internal temperatures in electrical enclosures.

• 50W Heating with Built-In Thermostat
• Plug-and-play
• 35mm DIN Rail Mountable