Enclosure Hygrotherms

The Hammond SKTH012009-C is an electronic hygrotherm designed to sense the ambient temperature and relative humidity in an electrical enclosure and turns on a heater or fan at a specific set point, helping prevent the condensation.

• Temperature Setting: 0-60 C
  Humidity Setting: 50 to 90 % RH
• Operating Voltage: 100-240 VAC
• Mounting: DIN Rail

The Stego ETF 012 series electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation of condensation in the enclosure. Due to its wide voltage range the hygrotherm can be utilised anywhere in the world.

• Temperature Setting: 0-60 C
  Humidity Setting: 50 to 90 % RH
• Operating Voltage: 100-240 VAC
• Mounting: DIN Rail

The Stego ETF 012 series electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation of condensation in the enclosure. Due to its wide voltage range the hygrotherm can be utilised anywhere in the world.

• Temperature Setting: 0-60 C
  Humidity Setting: 50 to 90 % RH
• Operating Voltage: 24-48 VDC
• Mounting: DIN Rail

The Stego ETF 012 series electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation of condensation in the enclosure. Due to its wide voltage range the hygrotherm can be utilised anywhere in the world.

• Temperature Setting: 0-60 C
  Humidity Setting: 50 to 90 % RH
• Operating Voltage: 100-240 VAC
• Mounting: DIN Rail

The Stego ETF 012 series electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation of condensation in the enclosure. Due to its wide voltage range the hygrotherm can be utilised anywhere in the world.

• Temperature Setting: 0-60 C
  Humidity Setting: 50 to 90 % RH
• Operating Voltage: 24-48 VDC
• Mounting: DIN Rail

The Stego ETF 012 series electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation of condensation in the enclosure. Due to its wide voltage range the hygrotherm can be utilised anywhere in the world.

• Temperature Setting: 32-140 F
  Humidity Setting: 50 to 90 % RH
• Operating Voltage: 100-240 VAC
• Mounting: DIN Rail

The Stego ETF 012 series electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation of condensation in the enclosure. Due to its wide voltage range the hygrotherm can be utilised anywhere in the world.

• Temperature Setting: 32-140 F
  Humidity Setting: 50 to 90 % RH
• Operating Voltage: 100-240 VAC
• Mounting: DIN Rail

The Hammond SKTH012009 is an electronic hygrotherm designed to sense the ambient temperature and relative humidity in an electrical enclosure and turns on a heater or fan at a specific set point, helping prevent the condensation.

• Temperature Setting: 32-140 F
  Humidity Setting: 50 to 90 % RH
• Operating Voltage: 100-240 VAC
• Mounting: DIN Rail

The FLZ610 series of electronic hygrostat and thermostat combination device.

• Hygrostat Range: 40-90 % R.H.
• Temperature Range: 0-60 C
• Rated Voltage: 230 VAC (50/60 Hz)

The Stego 01260.0-00 ETF 012 Electronic Hygrotherm monitors enclosure temperature and humidity to help prevent condensation while providing flexible DIN rail or screw mounting for industrial control panel applications.

• Operating voltage: 24–240V AC/DC
• Mounting: DIN rail or screw mounting

The Stego 01260.0-01 ETF 012 Electronic Hygrotherm monitors enclosure temperature and humidity to help prevent condensation while providing flexible DIN rail for industrial control panel applications.

• Operating voltage: 24–240V AC/DC
• Mounting: DIN Rail (35 mm)