Enclosure Thermal Management

The PF11000T12LG230 is a compact 17 CFM filter fan designed for NEMA 12 enclosures. It provides reliable airflow to manage internal heat while helping protect electrical components from dust and contaminants.

• UL-tested NEMA 12
• Click-and-fit
• Heat-resistant ABS

The Pfannenberg PF 11000 series reaches a particularly high airflow with flow optimized fins and rotor blades while providing an IP 54, Type 12 system of protection.

• Airflow rate up to 17 CFM
• System of protection IP 54, NEMA Type 12
• Cut-out dimensions: 3.6 x 3.6"
• Black

The Pfannenberg PF 11000 series reaches a particularly high airflow with flow optimized fins and rotor blades while providing an IP 54, Type 12 system of protection.

• Airflow rate up to 17 CFM
• System of protection IP 54, NEMA Type 12
• Cut-out dimensions: 3.6 x 3.6"
• Light gray

The PF11000T12BK24 is a compact 17 CFM filter fan designed for NEMA 12 enclosures. It provides reliable airflow to manage internal heat while helping protect electrical components from dust and contaminants.

• UL-tested NEMA 12
• Click-and-fit
• Heat-resistant ABS

The PF11000T12LG24 is a compact 17 CFM filter fan designed for NEMA 12 enclosures. It provides reliable airflow to manage internal heat while helping protect electrical components from dust and contaminants.

• UL-tested NEMA 12
• Click-and-fit
• Heat-resistant ABS

The Stego FF 018 series are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channeling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting air flow prevents formation of localized heat pockets and protects the electronic components from overheating.

• Intake and exhaust hoods prevent direct infiltration
• High air volume
• Minimal mounting depth
• UV resistant plastic

The Stego RFP 018 series are used in enclosures from which warm air must be diverted due to increased heat development. The ready-to-connect and low-noise roof filter fan is used to expel warm air from within the enclosure. Alternatively, the roof exhaust filter provides passive ventilation.

• Minimal mounting depth
• Very low noise
• High air volume
• Time-saving installation and mat exchange

The Stego FPI 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPI - Airflow direction in
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Hammond RH60000N4SS rain hood protects enclosure filter fans and exhaust filters from exposure to rain, sleet, and snow. Made of 304 stainless steel which withstands most corrosive solvents, alkalis, and some acids making it ideal for wash down applications. Compatible with PF Series enclosure filter fans and PFA Series exhaust filters.

• 304 stainless steel
• Easy washdown & disinfection
• Maximized airflow & superior overspray protection
• Easy maintenance & installation

The Stego FPO 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPO - Airflow direction out
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego FPI 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPI - Airflow direction in
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Saginaw SCE-BVKD is designed for indoor or outdoor applications to handle the large negative pressure differential caused in a tightly sealed enclosure in extreme weather conditions or wash down applications that draw water into the enclosure. Adding a breather vent will equalize this pressure differential. Installed on the bottom of an enclosure as a drain and vent.

• Corrosion proof
• UV resistant
• Drain & vent applicaition
• Bottom mount