The products below are available right now, we just don't have a page created for them yet. Please contact us for inquiries in the meantime.
List View
The Saginaw SCE-BVK is designed for indoor or outdoor applications to handle the large negative pressure differential caused in a tightly sealed enclosure in extreme weather conditions or wash down applications that draw water into the enclosure. Adding a breather vent will equalize this pressure differential. Installed on the side of your enclosure as a breather or installed on the bottom as a drain and vent.
The Bud Industries IPV-1115 is designed to equalize internal and external temperature and pressure, and to prevent internal condensation. Designed to accept a 60mm x 60mm fan (not included).
The Hammond 1555HF17GY is designed for harsh industrial environments or outdoor applications (security, outdoor wireless, controls etc. etc.)
The FLH-TF fan heater with thermostat is designed to protect electronics from the effects of low temperatures such as corrosion, freezing or condensation, which can damage critical components within a control enclosure.
Pfannenberg's PFH-T Compact Fan Heater is perfect for maintaining precise temperatures required for the proper function of electronics while also protecting equipment from damaging condensation caused by changes in temperature or humidity.
The Saginaw SCE-HF2001A is designed to protect electrical controls, instruments and sensitive components from low temperatures and the effects of condensation and corrosion by maintaining a stable temperature within the electrical enclosure. These heaters are not intended for use in hazardous, wet, dusty or dirty locations.
The compact HVL 031 high-performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures.
The Hammond 1555J2F17GY is designed for harsh industrial environments or outdoor applications and ideally suited for mounting printed circuit boards, panels or DIN rail mounted components.
The Saginaw SCE-HF2002A is designed to protect electrical controls, instruments and sensitive components from low temperatures and the effects of condensation and corrosion by maintaining a stable temperature within the electrical enclosure. These heaters are not intended for use in hazardous, wet, dusty or dirty locations.
Compact convection heater of temperature class T3 (392 ?F / 200 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.