Enclosure Thermal Management

The Stego 28402.0-01 is designed to provide a protected enclosure environment for valuable and crucial components with an IP66 rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.

• IP66 Protection
• Sold Individually
• Air Permeability 120 liters/hr
• Stainless Steel

The Stego 28401.0-00 is designed to provide a protected enclosure environment for valuable and crucial components with an IP66 rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.

• IP66 Protection
• Sold Individually
• Air Permeability 1200 liters/hr
• 303 Stainless Steel

The HGK 047 heaters are used in enclosures to maintain minimum operating temperatures and to help prevent failure of electronic components caused by condensation and corrosion.

• DIN Mounting
• I (grounded) / IP44
• UL File No. E234324, EAC

The PRH Mini series of radiant heaters consists of three versions with heating performance ratings of 10, 20 and 30 Watts. The new mini-heaters by Pfannenberg are particularly suitable for use in small housings or for the heating of isolated spots in sensitive areas.

• DIN Mounting
• II / IP54
• UL, cUL, CE

The Hammond CSKOG884 is designed for general purpose indoor commercial use as a junction, pull or switch box.

• Lift-Off
• Wall
• Unpainted galvanized steel
• NEMA Type 1

The Hammond 1555JF42GY is designed for harsh industrial environments or outdoor applications (security, outdoor wireless, controls etc. etc.)

• Lift-Off
• Wall
• RAL 7035 - Light Gray

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature must be maintained above a minimum value.

• DIN Mounting
• I (grounded) / IP20
• UL File No. E150057, VDE, EAC

The HGK 047 heaters are used in enclosures to maintain minimum operating temperatures and to help prevent failure of electronic components caused by condensation and corrosion.

• DIN Mounting
• I (grounded) / IP44
• VDE, EAC

The Stego FPI 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPI - Airflow direction in
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego FPI 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPI - Airflow direction in
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego FPO 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The Filter Fan Plus draws the heated air from the enclosure to the outside. Cooler outside air enters the enclosure via the intake filter.

• FPO - Airflow direction out
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego 28401.0-02 is designed to provide a protected enclosure environment for valuable and crucial components with an IP66 rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.

• IP66 Protection
• Sold Individually
• Air Permeability 1200 liters/hr
• 316 Stainless Steel