Enclosure Thermal Management

The Hammond PF 67000 R series reach a particularly high airflow and at the same time provide a Type 3R system of protection with flow optimized fins and rotor blades.

• Airflow rate up to 560 CFM
• System of protection NEMA Type 3R
• Cut-out dimensions: 11.46 x 11.46"
• Color: Light Gray

The Stego FPO 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPO - Airflow direction out
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego FPO 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPO - Airflow direction out
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The RCE 016 small heaters have been designed to prevent condensation and to ensure a minimum operating temperature in small enclosures.

• Screw Mounting
• II (double insulated) / IP54
• UL File No. E234324, EAC

The RCE 016 small heaters have been designed to prevent condensation and to ensure a minimum operating temperature in small enclosures.

• Screw Mounting
• II (double insulated) / IP54
• UL File No. E234324, VDE, EAC

The Stego FF 018 series are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channeling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting air flow prevents formation of localized heat pockets and protects the electronic components from overheating.

• Direction of air flow can be switched
• Intake and exhaust hoods prevent direct infiltration
• Self-adhesive seal
• Air channeling allows for quiet operation

The Altech AFF series filter fans are designed for use in enclosures where space is limited. Easily mounted and maintains a low external profile.

• Airflow rate up to 60 CFM
• System of protection NEMA Type 12
• Cut-out dimensions: 6.97 x 6.97"
• Color: Black

The Altech AFF series filter fans are designed for use in enclosures where space is limited. Easily mounted and maintains a low external profile.

• Airflow rate up to 60 CFM
• System of protection NEMA Type 12
• Cut-out dimensions: 6.97 x 6.97"
• Color: Light Gray

The FLH radiant heaters are used in combination with a thermostat or hygrostat, predominantly for the avoidance of excessively low temperatures or excessively high humidity in the control cabinet.

• DIN Mounting
• I / IP20
• UL, cUL, CE

The SHG Series is designed to provide enclosed electronic, pneumatic, hydraulic and mechanical equip­ment with protection from low temperatures, condensation and corrosion.

• DIN Mounting
• I / IP20
• UL, cUL, CE

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature must be maintained above a minimum value.

• DIN Mounting
• I (grounded) / IP20
• UL File No. E150057, VDE, EAC

The Pfannenberg PF 32000 series reaches a particularly high airflow with flow optimized fins and rotor blades while providing an IP 55, Type 12 system of protection.

• Airflow rate up to 65 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 6.97 x 6.97"
• Black