Enclosure Thermal Management

The Altech AFF series filter fans are designed for use in enclosures where space is limited. Easily mounted and maintains a low external profile.

• Airflow rate up to 70 CFM
• System of protection NEMA Type 12
• Cut-out dimensions: 8.78 x 8.78"
• Color: Black

The Altech AFF series filter fans are designed for use in enclosures where space is limited. Easily mounted and maintains a low external profile.

• Airflow rate up to 70 CFM
• System of protection NEMA Type 12
• Cut-out dimensions: 8.78 x 8.78"
• Color: Light Gray

The Saginaw SCE-TSH75 is a touch safe heater designed to protect your enclosure from low temperatures, condensation and corrosion. This heater features a DIN rail clip design for 35mm Din rail, a 2 screw terminal for standard AWG 14 wire, and positive temperature coefficient.

• Touch Safe
• Positive Temperature Coefficient
• 2 Screw Terminal
• 35mm Din Rail

The FLH radiant heaters are used in combination with a thermostat or hygrostat, predominantly for the avoidance of excessively low temperatures or excessively high humidity in the control cabinet.

• DIN Mounting
• I / IP20
• UL, cUL, CE

The Hammond PCJA0907 back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Aluminum Material
• Thickness: 0.08
• Finish: Natural
• Compatible with Hammond Manufacturing PCJ series enclosures.

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature must be maintained above a minimum value.

• DIN Mounting
• I (grounded) / IP20
• UL File No. E150057, VDE, EAC

The Altech AFF series filter fans are designed for use in enclosures where space is limited. Easily mounted and maintains a low external profile.

• Airflow rate up to 76 CFM
• System of protection NEMA Type 12
• Cut-out dimensions: 6.97 x 6.97"
• Color: Black

The Altech AFF series filter fans are designed for use in enclosures where space is limited. Easily mounted and maintains a low external profile.

• Airflow rate up to 76 CFM
• System of protection NEMA Type 12
• Cut-out dimensions: 6.97 x 6.97"
• Color: Light Gray

The FLH-TF fan heater with thermostat is designed to protect electronics from the effects of low temperatures such as corrosion, freezing or condensation, which can damage critical components within a control enclosure.

• 26 CFM
• Panel Mount Mounting
• Adjustable Thermostat
• I / IP20
• UL, CE

Pfannenberg's PFH-T Compact Fan Heater is perfect for maintaining precise temperatures required for the proper function of electronics while also protecting equipment from damaging condensation caused by changes in temperature or humidity.

• 30 CFM
• DIN Mounting
• Adjustable Thermostat
• II / IP20
• UL

The Saginaw SCE-HF8001B is designed to protect electrical controls, instruments and sensitive components from low temperatures and the effects of condensation and corrosion by maintaining a stable temperature within the electrical enclosure. These heaters are not intended for use in hazardous, wet, dusty or dirty locations.

• 26 CFM
• Heat discharge at top
• Includes heat indicator switch
• Fan/Auto switch

The Hammond CS666 is designed for general purpose indoor commercial use as a junction, pull or switch box.

• Lift-Off
• Wall
• ANSI 61 Gray
• NEMA Type 1