Enclosure Thermal Management

The Stego FPI 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPI - Airflow direction in
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego FPI 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPI - Airflow direction in
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego FPI 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPI - Airflow direction in
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego FPI 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPI - Airflow direction in
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego FPI 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPI - Airflow direction in
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego FPI 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPI - Airflow direction in
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego REP 118 series exhaust filter can be used for FPO or FPI systems. The FPI System consists of a filter fan and and an exhaust filter. The FPO System consists of an exhaust filter fan and an intake filter.

• Exhaust Filter
• Airflow direction in
• 9.8 x 9.8" cutout

The Altech APT Mechanical Panel Thermostats are designed to control the air temperature inside of enclosures and control panels. They can be used for enclosure heaters, cooling equipment, or signal devices.

• Adjustable Thermostat
• Setting Range (NC) : -10-80 F

The Altech APT Mechanical Panel Thermostats are designed to control the air temperature inside of enclosures and control panels. They can be used for enclosure heaters, cooling equipment, or signal devices.

• Adjustable Thermostat
• Setting Range (NC) : 14-176 F

Designed to regulate air temperature in enclosures that operate with heaters or fans. This mechanical bi-metallic thermostat has a set point range of 30? to 140? F and is easily installed on 35mm mounting rail.

• Adjustable Thermostat
• Setting Range (NC) : 30-140 F

Stego's KTO 111 series 11100.0-01 is a normally closed (NC) small compact mechanical thermostat for use up to 5,000 meters in altitude, thanks to the optimized air gap and increased creepage distance. It features a contact breaker for regulating heaters - the contact opens when temperature rises. By use of push-in terminals the thermostat is wired tool-free. The push-in terminals provide constant pressure on the wires to prevent them from coming loose.

• Temperature Range: -10 to +50 ?C
• Safe wiring with push-in connection terminal
• Faster and tool-free wiring
• Easy adjustability of switch temperature setting

The ST 011 thermostat is an SPST regulator with small hysteresis. The housing design ensures optimized air circulation around the sensor element.

• Adjustable Thermostat
• Setting Range (NC) : 0-60 C