Thermal Regulating & Monitoring

Designed to regulate air temperature in enclosures and operate with the Thermoelectric Coolers. This electronic thermostat has a set point range of 14? to 176?F and is easily installed on 35 mm mounting rail.

• Electronic Adjustable Thermostat
• Setting Range (NC): 14-176 F
  Setting Range (NO): 14-176 F

The ETR 011 electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat senses the surrounding air temperature and can switch both resistive and inductive loads via an SPDT contact.

• Electronic AdjustableThermostat
• Setting Range (NC): -20-60 C
  Setting Range (NO): -20-60 C

The ETR 011 electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat senses the surrounding air temperature and can switch both resistive and inductive loads via an SPDT contact.

• Electronic AdjustableThermostat
• Setting Range (NC): -4-140 F
  Setting Range (NO): -4-140 F

The ET 011 is an electronic thermostat for regulating high performance DC 24 V equipment. Heating or cooling equipment, as well as signal devices, can be switched via the SPDT (change-over) contact. A relatively small hysteresis sets the ET 011 Thermostat apart from less accurate mechanical thermostats.

• Electronic AdjustableThermostat
• Setting Range (NC): 0-60 C
  Setting Range (NO): 0-60 C

The ET 011 is an electronic thermostat for regulating high performance DC 24 V equipment. Heating or cooling equipment, as well as signal devices, can be switched via the SPDT (change-over) contact. A relatively small hysteresis sets the ET 011 Thermostat apart from less accurate mechanical thermostats.

• Electronic AdjustableThermostat
• Setting Range (NC): 32-140 F
  Setting Range (NO): 32-140 F

The FLZ610 series of electronic hygrostat and thermostat combination device.

• Hygrostat Range: 40-90 % R.H.
• Temperature Range: 0-60 C
• Rated Voltage: 230 VAC (50/60 Hz)

The Stego 01260.0-00 ETF 012 Electronic Hygrotherm monitors enclosure temperature and humidity to help prevent condensation while providing flexible DIN rail or screw mounting for industrial control panel applications.

• Operating voltage: 24–240V AC/DC
• Mounting: DIN rail or screw mounting

The Stego 01260.0-01 ETF 012 Electronic Hygrotherm monitors enclosure temperature and humidity to help prevent condensation while providing flexible DIN rail for industrial control panel applications.

• Operating voltage: 24–240V AC/DC
• Mounting: DIN Rail (35 mm)

The Altech APT Mechanical Panel Thermostats are designed to control the air temperature inside of enclosures and control panels. They can be used for enclosure heaters, cooling equipment, or signal devices.

• Adjustable Thermostat
• Setting Range (NC) : -10-80 F

The Altech APT Mechanical Panel Thermostats are designed to control the air temperature inside of enclosures and control panels. They can be used for enclosure heaters, cooling equipment, or signal devices.

• Adjustable Thermostat
• Setting Range (NC) : 14-176 F

Designed to regulate air temperature in enclosures that operate with heaters or fans. This mechanical bi-metallic thermostat has a set point range of 30? to 140? F and is easily installed on 35mm mounting rail.

• Adjustable Thermostat
• Setting Range (NC) : 30-140 F

Stego's KTO 111 series 11100.0-01 is a normally closed (NC) small compact mechanical thermostat for use up to 5,000 meters in altitude, thanks to the optimized air gap and increased creepage distance. It features a contact breaker for regulating heaters - the contact opens when temperature rises. By use of push-in terminals the thermostat is wired tool-free. The push-in terminals provide constant pressure on the wires to prevent them from coming loose.

• Temperature Range: -10 to +50 ?C
• Safe wiring with push-in connection terminal
• Faster and tool-free wiring
• Easy adjustability of switch temperature setting