The ETR 011 electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat senses the surrounding air temperature and can switch both resistive and inductive loads via an SPDT contact.

• Electronic Dual AdjustableThermostat
• Setting Range (NC): -20-60 C
  Setting Range (NO): -20-60 C

The ETR 011 electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat senses the surrounding air temperature and can switch both resistive and inductive loads via an SPDT contact.

• Electronic Dual AdjustableThermostat
• Setting Range (NC): -4-140 F
  Setting Range (NO): -4-140 F

The ET 011 is an electronic thermostat for regulating high performance DC 24 V equipment. Heating or cooling equipment, as well as signal devices, can be switched via the SPDT (change-over) contact. A relatively small hysteresis sets the ET 011 Thermostat apart from less accurate mechanical thermostats.

• Electronic Dual AdjustableThermostat
• Setting Range (NC): 0-60 C
  Setting Range (NO): 0-60 C

The ET 011 is an electronic thermostat for regulating high performance DC 24 V equipment. Heating or cooling equipment, as well as signal devices, can be switched via the SPDT (change-over) contact. A relatively small hysteresis sets the ET 011 Thermostat apart from less accurate mechanical thermostats.

• Electronic Dual AdjustableThermostat
• Setting Range (NC): 32-140 F
  Setting Range (NO): 32-140 F

Designed to regulate air temperature in enclosures and operate with the Thermoelectric Coolers. This electronic thermostat has a set point range of 14° to 176°F and is easily installed on 35 mm mounting rail.

• Electronic Dual Adjustable Thermostat
• Setting Range (NC): 14-176 F
  Setting Range (NO): 14-176 F

The FLZ series of twin thermostats integrates two independently switchable thermostats. They are available with N.C./N.O., N.C./N.C., and N.O./N.O. contacts.

• Dual Adjustable Thermostat
• Setting Range (NC): 0-60 C
  Setting Range (NC): 0-60 C

The FLZ series of twin thermostats integrates two independently switchable thermostats. They are available with N.C./N.O., N.C./N.C., and N.O./N.O. contacts.

• Dual Adjustable Thermostat
• Setting Range (NC): 32-140 F
  Setting Range (NC): 32-140 F

• Dual Fixed Thermostat
• Normally Closed (NC) Switch On: 41 F / 5 C - Switch Off: 59 F / 15 C
  Normally Open (NO) Switch On: 122 F / 50 C - Switch Off: 104 F / 40 C

• Dual Fixed Thermostat
• Normally Closed (NC) Switch On: 59 F / 15 C - Switch Off: 77 F / 25 C
  Normally Open (NO) Switch On: 140 F / 60 C - Switch Off: 122 F / 50 C

• Dual Fixed Thermostat
• Normally Closed (NC) Switch On: 41 F / 5 C - Switch Off: 59 F / 15 C
  Normally Open (NO) Switch On: 95 F / 35 C - Switch Off: 77 F / 25 C

• Dual Fixed Thermostat
• Normally Closed (NC) Switch On: 59 F / 15 C - Switch Off: 77 F / 25 C
  Normally Open (NO) Switch On: 122 F / 50 C - Switch Off: 104 F / 40 C

The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices where a higher degree of sensing accuracy is required. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.

• Dual AdjustableThermostat
• Setting Range (NC): 5-60 C
  Setting Range (NO): 5-60 C