Fiberglass Wall Mount Enclosures

The Saginaw Control & Engineering SCE-604FG is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-604FW is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents and require unrestricted viewing of gauges or controls.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Bud Industries PTH-22490-C assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6

The Bud Industries PTH-22490 assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6

The Bud Industries PTH-22442-C assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6

The Bud Industries PTH-22442 assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6

The Bud Industries PTH-22496-C assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6

The Bud Industries PTH-22496 assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6

The Allied Moulded AM864 is designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, chemical plants, and many other applications.

• Lift-Off
• Feet
• RAL 7035 - Gray
• NEMA Type 4, 4X, 6P, 12 and 13

The Allied Moulded AM864H is designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, chemical plants, and many other applications.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 4, 4X, 12 and 13

The Allied Moulded AM864L is designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, chemical plants, and many other applications.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 4, 4X, 12 and 13

The Allied Moulded AM864R is designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, chemical plants, and many other applications.

• Lift-Off
• Feet
• RAL 7035 - Gray
• NEMA Type 4, 4X, 6P, 12 and 13