Fiberglass Wall Mount Enclosures

The Bud Industries NFL-6630 is a wall mounting enclosure that's lightweight, non-conductive, impact resistant, and has good corrosion resistance.

• Hinged (Single Door)
• Wall
• ANSI 65 Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-6065CHQRFG is designed for indoor or outdoor use to house electrical and electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-606FG is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-606FW is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents and require unrestricted viewing of gauges or controls.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Bud Industries PTH-22510-C assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6

The Bud Industries PTH-22510 assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6

The Allied Moulded AM943 is designed to insulate and house pushbuttons and switches in applications that require a human-machine interface.

• Lift-Off
• Feet
• RAL 7035 Light Gray
• NEMA Type 3R, 4, 4X 12 and 13

The Allied Moulded AM943SF is designed to insulate and house pushbuttons and switches in applications that require a human-machine interface.

• Lift-Off
• Feet
• RAL 7035 Light Gray
• NEMA Type 3R, 4, 4X 12 and 13

The Hammond PJ944 is designed to insulate and house pushbuttons and switches in applications that require a human-machine interface.

• Lift-Off
• Feet
• RAL 7035 Light Gray
• NEMA Type 3R, 4, 4X 12 and 13

The Hammond PJ944FS is designed to insulate and house pushbuttons and switches in applications that require a human-machine interface.

• Lift-Off
• Without Feet
• RAL 7035 Light Gray
• NEMA Type 3, 4, 4X 12 and 13

The Bud Industries PTH-22492-C assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6

The Bud Industries PTH-22492 assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6