Hammond Manufacturing - Aluminum Diecast Enclosures

The Hammond 1590Z150GY is designed for use as electronic instrument enclosures, electrical junction boxes or terminal wiring enclosures.

• Lift-Off Door
• Painted Gray
• Wall Mount

The Hammond 1590Z155 is designed for use as electronic instrument enclosures, electrical junction boxes or terminal wiring enclosures.

• Lift-Off Door
• Natural Finish
• Wall Mount

The Hammond 1590Z155BK is designed for use as electronic instrument enclosures, electrical junction boxes or terminal wiring enclosures.

• Lift-Off Door
• Painted Black
• Wall Mount

The Hammond 1590Z155GY is designed for use as electronic instrument enclosures, electrical junction boxes or terminal wiring enclosures.

• Lift-Off Door
• Painted Gray
• Wall Mount

The Hammond 1550G is a rugged diecast aluminum enclosure finished in a natural vibra finish for a smooth surface with no sharp edges. Includes stainless steel philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP54 and does not include a gasket.

• IP54 Rated
• No Gasket Included
• Lift-Off Door
• Natural Finish

The Hammond 1550GBK is a rugged diecast aluminum enclosure painted with a tough satin black polyester powder paint for a long lasting finish even after machining. Includes black philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP54 and does not include a gasket.

• IP54 Rated
• No Gasket Included
• Lift-Off Door
• Powder Coated Black

The Hammond 1550WG is a rugged diecast aluminum enclosure finished in a natural vibra finish for a smooth surface with no sharp edges. Includes stainless steel philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP66 when the included water tight gasket is installed.

• IP66 Rated
• IP66 Gasket Included
• Lift-Off Door
• Natural Finish

The Hammond 1550WGBK is a rugged diecast aluminum enclosure painted with a tough satin black polyester powder paint for a long lasting finish even after machining. Includes black philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP66 when the included water tight gasket is installed.

• IP66 Rated
• IP66 Gasket Included
• Lift-Off Door
• Powder Coated Black

The Hammond 1427NCG series liquid-tight cable glands are used to seal cable entries, keep contaminants from entering enclosures, provide strain relief and thus reduce stress on components and termination points inside enclosures.

• Single Unit
• Clamping Range: 37 to 44 mm
• Rating: IP68
• Color: Black
• Standards: UL, RoHS

The Hammond 1550H is a rugged diecast aluminum enclosure finished in a natural vibra finish for a smooth surface with no sharp edges. Includes stainless steel philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP54 and does not include a gasket.

• IP54 Rated
• No Gasket Included
• Lift-Off Door
• Natural Finish

The Hammond 1550HBK is a rugged diecast aluminum enclosure painted with a tough satin black polyester powder paint for a long lasting finish even after machining. Includes black philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP54 and does not include a gasket.

• IP54 Rated
• No Gasket Included
• Lift-Off Door
• Powder Coated Black

The Hammond 1550WH is a rugged diecast aluminum enclosure finished in a natural vibra finish for a smooth surface with no sharp edges. Includes stainless steel philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP66 when the included water tight gasket is installed.

• IP66 Rated
• IP66 Gasket Included
• Lift-Off Door
• Natural Finish