The Hammond 1550WD is a rugged diecast aluminum enclosure finished in a natural vibra finish for a smooth surface with no sharp edges. Includes stainless steel philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP66 when the included water tight gasket is installed.

• IP66 Rated
• IP66 Gasket Included
• Lift-Off Door
• Natural Finish

The Hammond CWSC860 is construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.

• Lift-Off Screw Cover
• ANSI 61 Gray Finish
• NEMA Type 1
• RoHS

The Hammond N1J14128 is designed for indoor use to house controls, instruments and components not requiring oil-tight or dust-tight protection.

• Hinged (Single Door)
• Wall
• ANSI 61 Gray
• NEMA Type 1

The Hammond 1427NCG series liquid-tight cable glands are used to seal cable entries, keep contaminants from entering enclosures, provide strain relief and thus reduce stress on components and termination points inside enclosures.

• Single Unit
• Clamping Range: 3 to 4 mm
• Rating: IP68
• Color: Black
• Standards: UL, RoHS

The Hammond 1550P is a rugged diecast aluminum enclosure finished in a natural vibra finish for a smooth surface with no sharp edges. Includes stainless steel philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP54 and does not include a gasket.

• IP54 Rated
• No Gasket Included
• Lift-Off Door
• Natural Finish

The Hammond 1550PBK is a rugged diecast aluminum enclosure painted with a tough satin black polyester powder paint for a long lasting finish even after machining. Includes black philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP54 and does not include a gasket.

• IP54 Rated
• No Gasket Included
• Lift-Off Door
• Powder Coated Black

The Hammond 1550WP is a rugged diecast aluminum enclosure finished in a natural vibra finish for a smooth surface with no sharp edges. Includes stainless steel philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP66 when the included water tight gasket is installed.

• IP66 Rated
• IP66 Gasket Included
• Lift-Off Door
• Natural Finish

The Hammond 1550WPBK is a rugged diecast aluminum enclosure painted with a tough satin black polyester powder paint for a long lasting finish even after machining. Includes black philips head machine screws used to secure lid into factory tapped holes. The enclosure is designed to meet IP66 when the included water tight gasket is installed.

• IP66 Rated
• IP66 Gasket Included
• Lift-Off Door
• Powder Coated Black

The Hammond 1590Z061 is designed for use as electronic instrument enclosures, electrical junction boxes or terminal wiring enclosures.

• Lift-Off Door
• Natural Finish
• Wall Mount

The Hammond 1590Z061BK is designed for use as electronic instrument enclosures, electrical junction boxes or terminal wiring enclosures.

• Lift-Off Door
• Painted Black
• Wall Mount

The Hammond 1590Z061GY is designed for use as electronic instrument enclosures, electrical junction boxes or terminal wiring enclosures.

• Lift-Off Door
• Painted Gray
• Wall Mount

The Hammond R100-060-000 is designed to provide a degree of protection from accidental contact with the enclosed equipment and external environmental conditions.

• Lift-Off
• Feet
• RAL 7032 Beige
• NEMA Type 4, 4X, 12 and 13