The Hammond CSG24246 is designed for general purpose indoor commercial use as a junction, pull or switch box.

• Lift-Off
• Wall
• Unpainted galvanized steel
• NEMA Type 1

The Hammond PCJ14126L is designed to insulate and protect controls and components in both indoor and outdoor conditions.

• Hinged (Single Door)
• Feet
• Light Gray
• NEMA Type 4, 4X, 12 and 13

The Hammond 1487B24 is designed to enclose and protect electrical wiring from dirt, dust, oil and water and ideal for connecting machines to control panels or power sources.

• Hinged
• ANSI 61 Gray Finish
• NEMA Type 12
• CSA, UL and RoHS

The Hammond 1437D is designed to accept standard heavy duty oil tight pushbuttons, switches and pilot lights.

• Hinged
• Feet
• ANSI 61 Gray
• NEMA Type 12 and 13

The Hammond PJHMI1210CCH is an 12x10" HMI Cover Kit used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• Clear Cover, Hinged w/Screws
• Formed-In-Place (FIP) polyurethane gasket
• Polycarbonate, Stainelss Steel Hardware
• 100% UV Stabalized
• NEMA 1, 3, 3R, 4, 4X, 12 or 13

The Hammond PJHMI1210CCHTP is an 12x10" HMI Cover Kit used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• Clear Cover, Hinged w/Tamper-Proof Screws
• Formed-In-Place (FIP) polyurethane gasket
• Polycarbonate, Stainelss Steel Hardware
• 100% UV Stabalized
• NEMA 1, 3, 3R, 4, 4X, 12 or 13

The Hammond PJHMI1210CCL is an 12x10" HMI Cover Kit used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• Clear Cover, Hinged w/Screws
• Formed-In-Place (FIP) polyurethane gasket
• Polycarbonate, Stainelss Steel Hardware
• 100% UV Stabalized
• NEMA 1, 3, 3R, 4, 4X, 12 or 13

The Hammond PJHMI1210H is an 12x10" HMI Cover Kit used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• Opaque Cover, Hinged w/Screws
• Formed-In-Place (FIP) polyurethane gasket
• Polycarbonate, Stainelss Steel Hardware
• 100% UV Stabalized
• NEMA 1, 3, 3R, 4, 4X, 12 or 13

The Hammond PJHMI1210HTP is an 12x10" HMI Cover Kit used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• Opaque Cover, Hinged w/Tamper-Proof Screws
• Formed-In-Place (FIP) polyurethane gasket
• Polycarbonate, Stainelss Steel Hardware
• 100% UV Stabalized
• NEMA 1, 3, 3R, 4, 4X, 12 or 13

The Hammond PJHMI1210L is an 12x10" HMI Cover Kit used to protect electrical and electronic controls such as touch pads, pushbuttons, and other Human Machine Interface instruments.

• Opaque Cover, Hinged w/Screws
• Formed-In-Place (FIP) polyurethane gasket
• Polycarbonate, Stainelss Steel Hardware
• 100% UV Stabalized
• NEMA 1, 3, 3R, 4, 4X, 12 or 13

The Hammond CWSC1012GNK is designed to to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.

• Hinged
• Galvanized Steel

The Hammond CWST1012NK is construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.

• Hinged
• ANSI 61 Gray Finish
• NEMA Type 1
• RoHS