The Hammond 1427NCG series liquid-tight cable glands are used to seal cable entries, keep contaminants from entering enclosures, provide strain relief and thus reduce stress on components and termination points inside enclosures.

• Single Unit
• Clamping Range: 6 to 12 mm
• Rating: IP68
• Color: Black
• Standards: UL, RoHS

The Hammond DK42GY Drip Shield is designed to protect door hardware against dripping water and settling dust.

• Steel and finished with gray powder coating

The Hammond 1427BCG series liquid-tight cable glands are used to seal cable entries, keep contaminants from entering enclosures, provide strain relief and thus reduce stress on components and termination points inside enclosures.

• Single Unit
• Clamping Range: 5 to 10 mm
• Rating: IP68
• Color: Nickel
• Standards: UL, RoHS

The Hammond 1427NCG series liquid-tight cable glands are used to seal cable entries, keep contaminants from entering enclosures, provide strain relief and thus reduce stress on components and termination points inside enclosures.

• Single Unit
• Clamping Range: 22 to 32 mm
• Rating: IP68
• Color: Gray
• Standards: UL, RoHS

The Hammond PCJA0505 back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Aluminum Material
• Thickness: 0.08
• Finish: Natural
• Compatible with Hammond Manufacturing PCJ series enclosures.

The Hammond 14G0503 back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Galvanized Steel Material
• Thickness: 0.07
• Finish: Galvanized
• Compatible with Hammond Manufacturing 1414 and EJ series enclosures.

The Hammond 1590Z155BK is designed for use as electronic instrument enclosures, electrical junction boxes or terminal wiring enclosures.

• Lift-Off Door
• Painted Black
• Wall Mount

The Hammond 1590Z155GY is designed for use as electronic instrument enclosures, electrical junction boxes or terminal wiring enclosures.

• Lift-Off Door
• Painted Gray
• Wall Mount

The Hammond 14R1109SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• 304 SS Material
• Thickness: 0.07
• Finish: Brushed
• Compatible with Hammond Manufacturing 1414, EJ, HJ and PJ series enclosures.

The Hammond CWSC812 is construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.

• Lift-Off Screw Cover
• ANSI 61 Gray Finish
• NEMA Type 1
• RoHS

The Hammond PCJ884 is designed to insulate and protect controls and components in both indoor and outdoor conditions.

• Lift-Off
• Feet
• Light Gray
• NEMA Type 4, 4X, 12 and 13

The Hammond EP3012 back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Steel Material
• Thickness: 0.1
• Finish: Natural
• Compatible with Hammond Manufacturing Eclipse series enclosures.