The Hammond 1427NCG series liquid-tight cable glands are used to seal cable entries, keep contaminants from entering enclosures, provide strain relief and thus reduce stress on components and termination points inside enclosures.

• Single Unit
• Clamping Range: 5 to 10 mm
• Rating: IP68
• Color: Black
• Standards: UL, RoHS

The Hammond HP100PCGY is designed to seal unused holes in your enclosures such as push?button, conduit and knock?out holes while maintaining applicable NEMA/UL/CSA enclosure ratings.

• Hole Dia. Range: 1.38-1.62"
• Trade Size: 1.375
• ANSI 61 - Dark Gray Polycarbonate

The Hammond HP150PCGY is designed to seal unused holes in your enclosures such as push?button, conduit and knock?out holes while maintaining applicable NEMA/UL/CSA enclosure ratings.

• Hole Dia. Range: 2-2.19"
• Trade Size: 1.5
• ANSI 61 - Gray Polycarbonate

The Hammond HP12PCGY is designed to seal unused holes in your enclosures such as push?button, conduit and knock?out holes while maintaining applicable NEMA/UL/CSA enclosure ratings.

• Hole Dia. Range: 0.5-0.81"
• Trade Size: 0.5
• ANSI 61 - Gray Polycarbonate

The Hammond HP12PCLG is designed to seal unused holes in your enclosures such as push?button, conduit and knock?out holes while maintaining applicable NEMA/UL/CSA enclosure ratings.

• Hole Dia. Range: 0.5-0.81"
• Trade Size: 0.5
• RAL 7035 - Gray Polycarbonate

The Hammond HP22 is designed to seal unused holes in your enclosures such as push?button, conduit and knock?out holes while maintaining applicable NEMA/UL/CSA enclosure ratings.

• Hole Dia. Range: 0.88"
• Trade Size: 0.87
• Gray Steel

The Hammond HP22SS is designed to seal unused holes in your enclosures such as push?button, conduit and knock?out holes while maintaining applicable NEMA/UL/CSA enclosure ratings.

• Hole Dia. Range: 0.88"
• Trade Size: 0.9
• Brushed 304 Stainless Steel

The Hammond HP22SSN4 is designed to seal unused holes in your enclosures such as push?button, conduit and knock?out holes while maintaining applicable NEMA/UL/CSA enclosure ratings.

• Hole Dia. Range: 0.88"
• Trade Size: 2
• Brushed 304 Stainless Steel

The Hammond HP50PCGY is designed to seal unused holes in your enclosures such as push?button, conduit and knock?out holes while maintaining applicable NEMA/UL/CSA enclosure ratings.

• Hole Dia. Range: 0.81-0.94"
• Trade Size: 0.5
• ANSI 61 - Gray Polycarbonate

The Hammond HP50PCLG is designed to seal unused holes in your enclosures such as push?button, conduit and knock?out holes while maintaining applicable NEMA/UL/CSA enclosure ratings.

• Hole Dia. Range: 0.81-0.94"
• Trade Size: 0.5
• RAL 7035 - Gray Polycarbonate

The Hammond HP50 is designed to seal unused holes in your enclosures such as push?button, conduit and knock?out holes while maintaining applicable NEMA/UL/CSA enclosure ratings.

• Hole Dia. Range: 0.88"
• Trade Size: 0.5
• Gray Steel

The Hammond HP50SS is designed to seal unused holes in your enclosures such as push?button, conduit and knock?out holes while maintaining applicable NEMA/UL/CSA enclosure ratings.

• Hole Dia. Range: 0.88"
• Trade Size: 0.5
• Brushed 304 Stainless Steel