Accessories

The Raytek communications box is used with MI3 Series sensors to power and display sensor readings.

• Outputs: 0-20 mA, 4-20 mA, 0-5 V, 0-10 V
• Digital Interface: USB 2.0 and Profinet IO
• Channel: 4-Channel
• Housing: Molded Plastic

The Raytek communications box is used with MI3 Series sensors to power and display sensor readings.

• Outputs: 0-20 mA, 4-20 mA, 0-5 V, 0-10 V
• Digital Interface: USB 2.0
• Channel: Simultaneous 4-Channel Galvanic Isolated Analog Outputs
• Housing: Molded Plastic

Replacement laser switch box for GPS sensors

• Built-to-Order

The right angle mirror is used to turn the field of view by 90 degrees against the sensor axis. It is recommended when space limitations or excessive radiation do not allow for direct alignment of the sensor to the target. The mirror must be installed after the bracket and the air purge collar and must be screwed in fully.

The right angle mirror is used to turn the field of view by 90 degrees against the sensor axis. It is recommended when space limitations or excessive radiation do not allow for direct alignment of the sensor to the target. The mirror must be installed after the bracket and the air purge collar and must be screwed in fully.

The right angle mirror is used to turn the field of view by 90 degrees against the sensor axis. It is recommended when space limitations or excessive radiation do not allow for direct alignment of the sensor to the target. The mirror must be installed after the bracket and the air purge collar and must be screwed in fully. (Metric Thread)

The multi-channel box can be used for all communication boxes. The box includes 8 sets of field wiring terminals wired in parallel to one 5 m (16 ft) cable set to connect to the communication box. The box can withstand ambient temperatures of up to -4 to 212 F (-20 to 100 C).

Mounting Nuts (2) for Raytek CI Infrared Sensors

Mounting Nuts (2) for Raytek CI Infrared Sensors (Metric Thread)

Stainless Steel Mounting Nuts (2) for Raytek CM Infrared Sensors

Stainless Steel Mounting Nuts (2) for Raytek CM Infrared Sensors (Metric Thread)