Integra DIN18 is a set of 35mm slotted DIN rail, pre-cut to a length of 16.5" and includes mounting screws. The pre-cut size is designed to mount within all 18" wide Integra polycarbonate enclosures.

• Dims: 16.5 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN16-GEN is a set of 35mm slotted DIN rail, pre-cut to a length of 16.88" and includes mounting screws. The pre-cut size is designed to mount within all 16" wide Integra polycarbonate enclosures.

• Dims: 16.88 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN24 is a set of 35mm slotted DIN rail, pre-cut to a length of 23.63" and includes mounting screws. The pre-cut size is designed to mount within all 24" wide Integra polycarbonate enclosures.

• Dims: 23.63 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN4-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 3.82" and includes mounting screws. The pre-cut size is designed to mount within all 4" wide Integra polycarbonate enclosures.

• Dims: 3.82 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN6-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 4.5" and includes mounting screws. The pre-cut size is designed to mount within all 6" wide Integra polycarbonate enclosures.

• Dims: 4.5 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN5-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 4.88" and includes mounting screws. The pre-cut size is designed to mount within all 5" wide Integra polycarbonate enclosures.

• Dims: 4.88 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN6 is a set of 35mm slotted DIN rail, pre-cut to a length of 4.88" and includes mounting screws. The pre-cut size is designed to mount within all 6" wide Integra polycarbonate enclosures.

• Dims: 4.88 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN8 is a set of 35mm slotted DIN rail, pre-cut to a length of 6.75" and includes mounting screws. The pre-cut size is designed to mount within all 8" wide Integra polycarbonate enclosures.

• Dims: 6.75 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN8-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 6.75" and includes mounting screws. The pre-cut size is designed to mount within all 8" wide Integra polycarbonate enclosures.

• Dims: 6.75 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN10 is a set of 35mm slotted DIN rail, pre-cut to a length of 8.75" and includes mounting screws. The pre-cut size is designed to mount within all 10" wide Integra polycarbonate enclosures.

• Dims: 35mm x 7mm x 8.75" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

The Integra Enclosures P4043C Integra's Impact line polycarbonate enclosures are available in up to 8 standard configurations. Box configurations include Integra's standard EZ hinge or our new Low Profile hinge and either Integra's patented integrated latch or a stainless steel latch.

• Hinged (Single Door)
• Flange
• Light Gray
• NEMA Type 4X and 6P

The Integra Enclosures P4043CLL Integra's Impact line polycarbonate enclosures are available in up to 8 standard configurations. Box configurations include Integra's standard EZ hinge or our new Low Profile hinge and either Integra's patented integrated latch or a stainless steel latch.

• Hinged (Single Door)
• Flange
• Light Gray
• NEMA Type 4X