Integra DIN12 is a set of 35mm slotted DIN rail, pre-cut to a length of 10.75" and includes mounting screws. The pre-cut size is designed to mount within all 12" wide Integra polycarbonate enclosures.

• Dims: 10.75 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN14 is a set of 35mm slotted DIN rail, pre-cut to a length of 12.75" and includes mounting screws. The pre-cut size is designed to mount within all 14" wide Integra polycarbonate enclosures.

• Dims: 12.75 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN16 is a set of 35mm slotted DIN rail, pre-cut to a length of 15" and includes mounting screws. The pre-cut size is designed to mount within all 16" wide Integra polycarbonate enclosures.

• Dims: 15 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN16-GEN is a set of 35mm slotted DIN rail, pre-cut to a length of 16.88" and includes mounting screws. The pre-cut size is designed to mount within all 16" wide Integra polycarbonate enclosures.

• Dims: 16.88 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN18 is a set of 35mm slotted DIN rail, pre-cut to a length of 16.5" and includes mounting screws. The pre-cut size is designed to mount within all 18" wide Integra polycarbonate enclosures.

• Dims: 16.5 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN24 is a set of 35mm slotted DIN rail, pre-cut to a length of 23.63" and includes mounting screws. The pre-cut size is designed to mount within all 24" wide Integra polycarbonate enclosures.

• Dims: 23.63 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN4-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 3.82" and includes mounting screws. The pre-cut size is designed to mount within all 4" wide Integra polycarbonate enclosures.

• Dims: 3.82 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN5-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 4.88" and includes mounting screws. The pre-cut size is designed to mount within all 5" wide Integra polycarbonate enclosures.

• Dims: 4.88 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN6 is a set of 35mm slotted DIN rail, pre-cut to a length of 4.88" and includes mounting screws. The pre-cut size is designed to mount within all 6" wide Integra polycarbonate enclosures.

• Dims: 4.88 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN6-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 4.5" and includes mounting screws. The pre-cut size is designed to mount within all 6" wide Integra polycarbonate enclosures.

• Dims: 4.5 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN8 is a set of 35mm slotted DIN rail, pre-cut to a length of 6.75" and includes mounting screws. The pre-cut size is designed to mount within all 8" wide Integra polycarbonate enclosures.

• Dims: 6.75 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN8-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 6.75" and includes mounting screws. The pre-cut size is designed to mount within all 8" wide Integra polycarbonate enclosures.

• Dims: 6.75 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two