The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Steel Plunger Pin
• Thread: M16

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Steel Plunger Pin
• Steel Lock Nut
• Thread: M16

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Steel Plunger Pin
• Thread: M20

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Steel Plunger Pin
• Steel Lock Nut
• Thread: M20

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Steel Plunger Pin
• Thread: M20

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Steel Plunger Pin
• Steel Lock Nut
• Thread: M20

The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Steel Plunger Pin
• Thread: M12

The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M12

The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Steel Plunger Pin
• Thread: M16

The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M16

The J.W.Winco series GN817.3 have been developed to enable precise locating when guide bushings are used. A plain guide bushing is used whereby the dimension of the plunger determines the length of the bushing. Both components are hardened and ground. The bushing length influences the accuracy of the positioning. The version with rest position is used in such applications where the plunger must not protrude continually. In that case, the knob is retracted and then turned by 90�. A notch prevents the plunger from turning by error or vibration.

• Steel Plunger Pin
• Lock-Out

The J.W.Winco series GN817.3 have been developed to enable precise locating when guide bushings are used. A plain guide bushing is used whereby the dimension of the plunger determines the length of the bushing. Both components are hardened and ground. The bushing length influences the accuracy of the positioning. The version with rest position is used in such applications where the plunger must not protrude continually. In that case, the knob is retracted and then turned by 90�. A notch prevents the plunger from turning by error or vibration.

• Steel Plunger Pin
• Lock-Out