The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195� F.

• No Holes
• Finish: Black

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195� F.

• No Holes
• Finish: Anodized

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195� F.

• No Holes
• Finish: Black

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195� F.

• No Holes
• Finish: Anodized

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195� F.

• No Holes
• Finish: Black

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195� F.

• No Holes
• Finish: Anodized

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195� F.

• No Holes
• Finish: Black

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195� F.

• No Holes
• Finish: Anodized

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195� F.

• No Holes
• Finish: Black

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195� F.

• No Holes
• Finish: Anodized

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195� F.

• No Holes
• Finish: Black

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195� F.

• No Holes
• Finish: Anodized