The J.W.Winco series GN425 are supplied with two stainless steel location disks, which guarantee a perfect location even with large holes in the cabinet. The disks are loosely enclosed.

• Tapped Holes
• Hole Distance: 8.00" mm
• Finish: Shot-Blasted
• Thread: 10 x 32

The J.W.Winco series GN425 are supplied with two stainless steel location disks, which guarantee a perfect location even with large holes in the cabinet. The disks are loosely enclosed.

• Tapped Holes
• Hole Distance: 9.00" mm
• Finish: Shot-Blasted
• Thread: 10 x 32

The J.W.Winco series GN425 are supplied with two stainless steel location disks, which guarantee a perfect location even with large holes in the cabinet. The disks are loosely enclosed.

• Tapped Holes
• Hole Distance: 9.00" mm
• Finish: Shot-Blasted
• Thread: 10 x 32

The J.W.Winco series GN427.5 are produced from profiled extrusions.

• Tapped Holes
• Hole Distance: 235 mm
• Finish: Shot-Blasted

The J.W.Winco series GN425 are supplied with two stainless steel location disks, which guarantee a perfect location even with large holes in the cabinet. The disks are loosely enclosed.

• Tapped Holes
• Hole Distance: 235 mm
• Finish: Shot-Blasted
• Thread: M5

The J.W.Winco series GN426.5 can be mounted from the back (Type A) or from the operator's side (Type B). In the latter case, the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw. The mounting studs allow the handles to be assembled back to back, to produce a double handle.

• Tapped Holes
• Hole Distance: 250 mm
• Finish: Shot-Blasted
• Thread: M10

The J.W.Winco series GN426.5 can be mounted from the back (Type A) or from the operator's side (Type B). In the latter case, the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw. The mounting studs allow the handles to be assembled back to back, to produce a double handle.

• Tapped Holes
• Hole Distance: 250 mm
• Finish: Shot-Blasted
• Thread: M10

The J.W.Winco series GN565.5 is a stainless steel handle often used in the food industry or other such applications where a non-corrosive material is necessary. The shape of this sturdy handle has good ergonomic features. Type A "U" Handles are made from profile extrusions.

• Tapped Holes
• Hole Distance: 250 mm
• Finish: Shot-Blasted
• Thread: M6

The J.W.Winco series GN666.4 are an advanced development of GN 666 tubular handles with straight tube. The curved shape is another modern industrial design element.

• Tapped Inserts
• Hole Distance: 400 mm
• Finish: Polished Matte
• Thread: M6

The J.W.Winco series GN666.4 are an advanced development of GN 666 tubular handles with straight tube. The curved shape is another modern industrial design element.

• Tapped Inserts
• Hole Distance: 400 mm
• Finish: Polished Matte
• Thread: M8

The J.W.Winco series GN666.4 are an advanced development of GN 666 tubular handles with straight tube. The curved shape is another modern industrial design element.

• Tapped Inserts
• Hole Distance: 500 mm
• Finish: Polished Matte
• Thread: M6

The J.W.Winco series GN666.4 are an advanced development of GN 666 tubular handles with straight tube. The curved shape is another modern industrial design element.

• Tapped Inserts
• Hole Distance: 500 mm
• Finish: Polished Matte
• Thread: M8