The Lovato P1MB1PD04 is suitable for branch circuit device protection.(Pack of 12)

• Terminal Type: Screw
• Amperage: 4
• Pole: 1
• Trip Curve: D
• UL 1077 Listed, CSA C22.2 No. 235, IEC/EN 60947-2

The Lovato P1MB2PB04 is suitable for branch circuit device protection. (Pack of 6)

• Terminal Type: Screw
• Amperage: 4
• Poles: 2
• Trip Curve: B
• UL 1077 Listed, CSA C22.2 No. 235, IEC/EN 60898-1, IEC/EN 60947-2

The Lovato P1MB2PC04 is suitable for branch circuit device protection. (Pack of 6)

• Terminal Type: Screw
• Amperage: 4
• Poles: 2
• Trip Curve: C
• UL 1077 Listed, CSA C22.2 No. 235, IEC/EN 60898-1, IEC/EN 60947-2

The Lovato P1MB2PD04 is suitable for branch circuit device protection. (Pack of 6)

• Terminal Type: Screw
• Amperage: 4
• Poles: 2
• Trip Curve: D
• UL 1077 Listed, CSA C22.2 No. 235, IEC/EN 60898-1, IEC/EN 60947-2

The Lovato P1MBUH2PC04 is designed to protect feeder circuits, the part of the system from the network supply point to the protection device for a branch circuit. (Pack of 6)

• Terminal Type: Screw
• Amperage: 4
• Poles: 2
• Trip Curve: C
• UL 489 Listed, EAC, cUlus, IEC/EN/BS 60947-2

The Lovato P1MBUH2PD04 is designed to protect feeder circuits, the part of the system from the network supply point to the protection device for a branch circuit. (Pack of 6)

• Terminal Type: Screw
• Amperage: 4
• Poles: 2
• Trip Curve: D
• UL 489 Listed, EAC, cUlus, IEC/EN/BS 60947-2

The Lovato P1MB3PC04 is suitable for branch circuit device protection. (Pack of 4)

• Terminal Type: Screw
• Amperage: 4
• Poles: 3
• Trip Curve: C
• UL 1077 Listed, CSA C22.2 No. 235, IEC/EN 60898-1, IEC/EN 60947-2

The Lovato P1MBUH3PC04 is suitable for branch circuit device protection. (Pack of 4)

• Terminal Type: Screw
• Amperage: 4
• Poles: 3
• Trip Curve: C
• UL 489 Listed, IEC/EN 60947-2

The Lovato P1MB3PB04 is suitable for branch circuit device protection. (Pack of 4)

• Terminal Type: Screw
• Amperage: 4
• Poles: 3
• Trip Curve: B
• UL 1077 Listed, CSA C22.2 No. 235, IEC/EN 60947-2

The Lovato P1MB3PD04 is suitable for branch circuit device protection. (Pack of 4)

• Terminal Type: Screw
• Amperage: 4
• Poles: 3
• Trip Curve: D
• UL 1077 Listed, CSA C22.2 No. 235, IEC/EN 60947-2

Lovato's Platinum series LPCPA005 Monoblock Potentiometer are typically used for regulating parameters of many devices (e.g. the speed of the electic motors through static converters). The monoblock body design permits direct use of the potentiometer by panel fitting with fixing ring and subsequent tightening of cables into the built-in terminal block.

• Resistance Value: 5 k?
• Mounting Size: 22 mm
• Voltage: 250 VAC

Lovato's Platinum series LPCPA050 Monoblock Potentiometer are typically used for regulating parameters of many devices (e.g. the speed of the electic motors through static converters). The monoblock body design permits direct use of the potentiometer by panel fitting with fixing ring and subsequent tightening of cables into the built-in terminal block.

• Resistance Value: 50 k?
• Mounting Size: 22 mm
• Voltage: 250 VAC