Polycarbonate Enclosures

The Altelix NP141105VFD4 is ideal for protecting equipment from harsh environments and tampering. This enclosure features a terminal strip and ground lug for simplified wiring on-site. The pre-installed PG16 cable gland is designed for use with a much wider range cable types and will seal against cable much thinner then a typical PG16 cable gland. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100?F and turns off when it drops to 79?F.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Altelix NP141105V features two 3 inch air vents covered by rain shields, with cleanable screens. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries. Moulded out of UV resistant PC+ABS, a high thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Altelix NP141105VP features two 3 inch air vents covered by rain shields, with cleanable screens. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries. Moulded out of UV resistant PC+ABS, a high thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. 2mm thick aluminum mounting plate included.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Bud Industries NBB-10265 is a wall mounting enclosure that's lightweight, non-conductive, impact resistant, and has good corrosion resistance.

• Hinged (Single Door)
• Wall
• ANSI 65 Gray
• NEMA Type 4, 4X, 12 and 13

The Bud Industries NBB-10245 is a wall mounting enclosure that's lightweight, non-conductive, impact resistant, and has good corrosion resistance.

• Hinged (Single Door)
• Wall
• ANSI 65 Gray
• NEMA Type 4, 4X, 12 and 13

The Bud Industries NBB-22245 is a wall mounting enclosure that's lightweight, non-conductive, impact resistant, and has good corrosion resistance.

• Hinged (Single Door)
• Wall
• ANSI 65 Gray
• NEMA Type 4, 4X, 12 and 13

The Bud Industries NBB-15245 is a wall mounting enclosure that's lightweight, non-conductive, impact resistant, and has good corrosion resistance.

• Hinged (Single Door)
• Wall
• ANSI 65 Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-1210PCW is designed for indoor or outdoor use to house electrical and electronic controls, instruments and components in areas that may be regularly hosed down or are in very wet conditions.

• Hinged (Single Door)
• Feet
• RAL 7035 Light Gray
• NEMA Type 3R, 4, 4X, 12 and 16

The Saginaw Control & Engineering SCE-1210PC is designed for indoor or outdoor use to house electrical and electronic controls, instruments and components in areas that may be regularly hosed down or are in very wet conditions.

• Hinged (Single Door)
• Feet
• RAL 7035 Light Gray
• NEMA Type 3R, 4, 4X, 12 and 13

The Fibox UL PCT 153410 is designed to house electrical controls, instruments and components in areas that do not require oil, water and dust tight protection.

• Lift-Off
• Wall
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Fibox UL PC 153410 is designed to house electrical controls, instruments and components in areas that do not require oil, water and dust tight protection.

• Lift-Off
• Wall
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Fibox UL PCT 153412 is designed to house electrical controls, instruments and components in areas that do not require oil, water and dust tight protection.

• Lift-Off
• Wall
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13