The Saginaw SCE-TSH100 is a touch safe heater designed to protect your enclosure from low temperatures, condensation and corrosion. This heater features a DIN rail clip design for 35mm Din rail, a 2 screw terminal for standard AWG 14 wire, and positive temperature coefficient.

• Touch Safe
• Positive Temperature Coefficient
• 2 Screw Terminal
• 35mm Din Rail

The Saginaw Control & Engineering SCE-1010SC is designed for use as electrical junction boxes, terminal wiring boxes, instrument housings, and electrical control enclosures. Provides protection from dust, oil and water.

• Lift-Off
• Flange
• ANSI 61 - Gray
• NEMA Type 3R, 4, 12 and 13

The Saginaw Control & Engineering SCE-10N1004LP is designed to house electrical controls, instruments and components in areas that do not require oil, water and dust tight protection.

• Hinged (Single Door)
• Pre-drilled mounting holes (flange mounts sold separately)
• ANSI 61 Gray
• NEMA Type 1

The Saginaw Control & Engineering SCE-10R104 is designed to house electrical controls, instruments and components in an outdoor environment.

• Hinged (Single Door)
• Feet
• ANSI 61 Gray
• NEMA Type 3R

The Saginaw Control & Engineering SCE-9PBHSSI is designed to house standard pushbuttons, switches and pilot lights in wet and hosed down areas and in corrosive atmospheres.

• Hinged (Single Door)
• Flange
• Brushed
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-9PBHSS is designed to house standard pushbuttons, switches and pilot lights in wet and hosed down areas and in corrosive atmospheres.

• Hinged (Single Door)
• Flange
• Brushed
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-9PBHSS6I is designed to house standard pushbuttons, switches and pilot lights in wet and hosed down areas and in corrosive atmospheres.

• Hinged (Single Door)
• Flange
• Brushed
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-9PBHSS6 is designed to house standard pushbuttons, switches and pilot lights in wet and hosed down areas and in corrosive atmospheres.

• Hinged (Single Door)
• Flange
• Brushed
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-9PBHI is designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil.

• Hinged (Single Door)
• Flange
• ANSI 61 - Gray
• NEMA Type 4, 12 and 13

The Saginaw Control & Engineering SCE-9PBH is designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil.

• Hinged (Single Door)
• Flange
• ANSI 61 - Gray
• NEMA Type 4, 12, and 13

The Saginaw Control & Engineering SCE-10106CHNF is designed for use as electrical junction boxes, terminal wiring boxes, instrument housings, and electrical control enclosures. Provides protection from dust, dirt, oil and water.

• Hinged (Single Door)
• Flange
• ANSI 61 - Gray
• NEMA Type 3R, 4, 12 and 13

The Saginaw Control & Engineering SCE-10106ELJ is designed to house electrical controls, instruments and components in areas, which may be regularly hosed down or are in very wet or oily conditions. Provides protection from dust, dirt, oil, and water.

• Hinged (Single Door)
• Mounting Feet
• ANSI 61 - Gray
• NEMA Type 3R, 4, 12 and 13