The Saginaw Control & Engineering SCE-1816PCW is designed for indoor or outdoor use to house electrical and electronic controls, instruments and components in areas that may be regularly hosed down or are in very wet conditions.

• Hinged (Single Door)
• Feet
• RAL 7035 Light Gray
• NEMA Type 3R, 4, 4X, 12 and 19

The Saginaw Control & Engineering SCE-1816PC is designed for indoor or outdoor use to house electrical and electronic controls, instruments and components in areas that may be regularly hosed down or are in very wet conditions.

• Hinged (Single Door)
• Feet
• RAL 7035 Light Gray
• NEMA Type 3R, 4, 4X, 12 and 13

The Saginaw SCE-BVKD is designed for indoor or outdoor applications to handle the large negative pressure differential caused in a tightly sealed enclosure in extreme weather conditions or wash down applications that draw water into the enclosure. Adding a breather vent will equalize this pressure differential. Installed on the bottom of an enclosure as a drain and vent.

• Corrosion proof
• UV resistant
• Drain & vent applicaition
• Bottom mount

The Saginaw SCE-BVK is designed for indoor or outdoor applications to handle the large negative pressure differential caused in a tightly sealed enclosure in extreme weather conditions or wash down applications that draw water into the enclosure. Adding a breather vent will equalize this pressure differential. Installed on the side of your enclosure as a breather or installed on the bottom as a drain and vent.

• Corrosion proof
• UV resistant
• Drain & vent applicaition
• Side/bottom mount

The Saginaw SCE-HF2001A is designed to protect electrical controls, instruments and sensitive components from low temperatures and the effects of condensation and corrosion by maintaining a stable temperature within the electrical enclosure. These heaters are not intended for use in hazardous, wet, dusty or dirty locations.

• 16 CFM
• Heat discharge at top
• Includes heat indicator switch
• Fan/Auto switch

The Saginaw SCE-HF2002A is designed to protect electrical controls, instruments and sensitive components from low temperatures and the effects of condensation and corrosion by maintaining a stable temperature within the electrical enclosure. These heaters are not intended for use in hazardous, wet, dusty or dirty locations.

• 16 CFM
• Heat discharge at top
• Includes heat indicator switch
• Fan/Auto switch

The Saginaw Control & Engineering SCE-20EL1206LP is designed to house electrical and electronic controls, instruments and components. Provides protection from dust, oil and water.

• Hinged (Single Door)
• Feet
• ANSI 61 Gray
• NEMA Type 3R, 4, 12 and 13

The Saginaw Control & Engineering SCE-20EL1206LPLG is designed to house electrical and electronic controls, instruments and components. Provides protection from dust, oil and water.

• Hinged (Single Door)
• Wall
• RAL 7035 Light Gray
• NEMA Type 3R, 4, 12 and 13

The Saginaw Control & Engineering SCE-20H1206LP is designed to house electrical and electronic controls, instruments and components. Provides protection from dust, oil and water.

• Hinged (Single Door)
• Feet
• ANSI 61 Gray
• NEMA Type 3R, 4, 12 and 13

The Saginaw Control & Engineering SCE-20H1208LP is designed to house electrical and electronic controls, instruments and components. Provides protection from dust, oil and water.

• Hinged (Single Door)
• Feet
• ANSI 61 Gray
• NEMA Type 3R, 4, 12 and 13

The Saginaw Control & Engineering SCE-20EL1610SSLP is designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions.

• Opaque/Solid
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13