The Saginaw Type 3R series has an easy to install snap fit design for use in enclosures that require cooling in NEMA 3R applications. Grille is made of black UV and water resistant, self-extinguishing PVC material, housing is made of ABS material with steel inner guard.

• Airflow rate up to 158.9 CFM
• System of protection NEMA Type 3R
• Cut-out dimensions: 8.91 x 8.91"
• Color: Black

The Saginaw Type 3R series has an easy to install snap fit design for use in enclosures that require cooling in NEMA 3R applications. Grille is made of black UV and water resistant, self-extinguishing PVC material, housing is made of ABS material with steel inner guard.

• Airflow rate up to 158.9 CFM
• System of protection NEMA Type 3R
• Cut-out dimensions: 8.91 x 8.91"
• Color: Black

The Saginaw Type 3R series has an easy to install snap fit design for use in enclosures that require cooling in NEMA 3R applications. Grille is made of black UV and water resistant, self-extinguishing PVC material, housing is made of ABS material with steel inner guard.

• Airflow rate up to 341.4 CFM
• System of protection NEMA Type 3R
• Cut-out dimensions: 11.57 x 11.57"
• Color: Black

The Saginaw Type 3R series has an easy to install snap fit design for use in enclosures that require cooling in NEMA 3R applications. Grille is made of black UV and water resistant, self-extinguishing PVC material, housing is made of ABS material with steel inner guard.

• Airflow rate up to 341.4 CFM
• System of protection NEMA Type 3R
• Cut-out dimensions: 11.57 x 11.57"
• Color: Black

The Saginaw Type 3R series has an easy to install snap fit design for use in enclosures that require cooling in NEMA 3R applications. Grille is made of black UV and water resistant, self-extinguishing PVC material, housing is made of ABS material with steel inner guard.

• Airflow rate up to 494 CFM
• System of protection NEMA Type 3R
• Cut-out dimensions: 11.57 x 11.57"
• Color: Black

The Saginaw Type 3R series has an easy to install snap fit design for use in enclosures that require cooling in NEMA 3R applications. Grille is made of black UV and water resistant, self-extinguishing PVC material, housing is made of ABS material with steel inner guard.

• Airflow rate up to 494 CFM
• System of protection NEMA Type 3R
• Cut-out dimensions: 11.57 x 11.57"
• Color: Black

Designed to regulate air temperature in enclosures that operate with heaters or fans. This mechanical bi-metallic thermostat has a set point range of 30� to 140� F and is easily installed on 35mm mounting rail.

• Adjustable Thermostat
• Setting Range (NC) : 30-140 F

Designed to regulate air temperature in enclosures that operate with heaters or fans. This mechanical bi-metallic thermostat has a set point range of 30� to 140� F and is easily installed on 35mm mounting rail.

• Adjustable Thermostat
• Setting Range (NO) : 30-140 F

This mechanical bi-metallic thermostat is easily installed on a 35mm mounting rail. Dual functions as (NC) contact normally closed, or (NO) contact normally open.

• Dual Adjustable Thermostat
• Setting Range (NC): 30-140 F
  Setting Range (NO): 30-140 F

Designed to regulate air temperature in enclosures, can operate with heaters, fans or warning lights. Used to switch from heating to cooling. Switches one common contact immediately from one state (NC) to the other (NO) and vice versa.

• Adjustable Thermostat
• Setting Range (NC): 32-140 F
  Setting Range (NO): 32-140 F

Designed to regulate air temperature in enclosures and operate with the Thermoelectric Coolers. This electronic thermostat has a set point range of 14� to 176�F and is easily installed on 35 mm mounting rail.

• Electronic Adjustable Thermostat
• Setting Range (NC): 14-176 F
  Setting Range (NO): 14-176 F

The Saginaw SCE-BVK is designed for indoor or outdoor applications to handle the large negative pressure differential caused in a tightly sealed enclosure in extreme weather conditions or wash down applications that draw water into the enclosure. Adding a breather vent will equalize this pressure differential. Installed on the side of your enclosure as a breather or installed on the bottom as a drain and vent.

• Corrosion proof
• UV resistant
• Drain & vent applicaition
• Side/bottom mount