Enclosure Thermal Management

The CSF 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air.

• DIN Mounting
• Fixed Thermostat
• II (double insulated) / IP20
• UL File No. E150057, VDE, EAC

The CSF 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air.

• DIN Mounting
• Fixed Thermostat
• II (double insulated) / IP20
• UL File No. E150057, VDE, EAC

The CS 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air.

• DIN Mounting
• II (double insulated) / IP20
• UL File No. E150057, VDE, EAC

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature must be maintained above a minimum value.

• DIN Mounting
• I (grounded) / IP20
• UL File No. E150057, VDE, EAC

Stego's CP061 series flat heater is used to provide an evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive contact to a component or a cabinet wall in need to be heated.

• 230 VAC
• 100W Heating Capacity
• Screw Mount
• Aluminum

Stego's CP061 series flat heater is used to provide an evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive contact to a component or a cabinet wall in need to be heated.

• 120 VAC
• 100W Heating Capacity
• Screw Mount
• Aluminum Aluminum

The Hammond N1JP1612 back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Steel Material
• Thickness: 0.06
• Finish: White
• Compatible with Hammond Manufacturing N1J series enclosures.

The Hammond CWCP10NK is a Closing Plate without Knockout for wireway applications.

The HGK 047 heaters are used in enclosures to maintain minimum operating temperatures and to help prevent failure of electronic components caused by condensation and corrosion.

• DIN Mounting
• I (grounded) / IP44
• UL File No. E234324, EAC

The PRH Mini series of radiant heaters consists of three versions with heating performance ratings of 10, 20 and 30 Watts. The new mini-heaters by Pfannenberg are particularly suitable for use in small housings or for the heating of isolated spots in sensitive areas.

• DIN Mounting
• II / IP54
• UL, cUL, CE

The Hammond 1555F2F42GY is designed for harsh industrial environments or outdoor applications and ideally suited for mounting printed circuit boards, panels or DIN rail mounted components.

• Lift-Off Cover
• RAL 7035 - Gray
• NEMA Type 4, 4X, 6, 6P, 12 and 13

The RC 016 small heaters are designed to prevent condensation and to ensure a minimum operating temperature in small enclosures.

• Screw Mounting
• II (double insulated) / IP54
• UL File No. E234324, EAC