Enclosure Thermal Management

The Hammond RH20000N4SS rain hood protects enclosure filter fans and exhaust filters from exposure to rain, sleet, and snow. Made of 304 stainless steel which withstands most corrosive solvents, alkalis, and some acids making it ideal for wash down applications. Compatible with PF Series enclosure filter fans and PFA Series exhaust filters.

• 304 stainless steel
• Easy washdown & disinfection
• Maximized airflow & superior overspray protection
• Easy maintenance & installation

The Stego FF 018 series are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channeling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting air flow prevents formation of localized heat pockets and protects the electronic components from overheating.

• Direction of air flow can be switched
• Intake and exhaust hoods prevent direct infiltration
• Self-adhesive seal
• Air channeling allows for quiet operation

The Stego FF 018 series can be used in outdoor enclosures where warm air has to be dissipated. A protection type of IP55 is achieved due to the special design of the hood and the use of fine filter mats. The plastic used for the hood of this filter fan is highly weather and UV light resistant.

• Weather and UV resistant
• Lockable outer door
• Quick and easy filter change
• Impact resistant

The Saginaw Type 3R series has an easy to install snap fit design for use in enclosures that require cooling in NEMA 3R applications. Grille is made of black UV and water resistant, self-extinguishing PVC material, housing is made of ABS material with steel inner guard.

• Airflow rate up to 12.6 CFM
• System of protection NEMA Type 1, 3R, 12
• Cut-out dimensions: 3.66 x 3.66"
• Color: Light Gray

The Saginaw Type 3R series has an easy to install snap fit design for use in enclosures that require cooling in NEMA 3R applications. Grille is made of black UV and water resistant, self-extinguishing PVC material, housing is made of ABS material with steel inner guard.

• Airflow rate up to 12.6 CFM
• System of protection NEMA Type 1, 3R, 12
• Cut-out dimensions: 3.75 x 3.75"
• Color: Black

The compact CS 030 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures

• 94 CFM
• Screw Mounting
• Adjustable Thermostat
• II (double insulated) / IP20
• UL File No. E150057, EAC

The compact CS 030 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures

• 94 CFM
• Screw Mounting
• II (double insulated) / IP20
• UL File No. E150057, EAC

The compact CS 130 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures.

• 94 CFM
• DIN Mounting
• Adjustable Thermostat
• II (double insulated) / IP20
• UL File No. E150057, EAC

The compact CS 130 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures.

• 94 CFM
• DIN Mounting
• II (double insulated) / IP20
• UL File No. E150057, EAC

The compact CS 030 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures

• 94 CFM
• Screw Mounting
• Adjustable Thermostat
• II (double insulated) / IP20
• UL File No. E150057, VDE, EAC

The compact CS 030 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures

• 94 CFM
• Screw Mounting
• II (double insulated) / IP20
• UL File No. E150057, VDE, EAC

The compact CS 130 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures.

• 94 CFM
• DIN Mounting
• Adjustable Thermostat
• II (double insulated) / IP20
• UL File No. E150057, VDE, EAC