Enclosure Thermal Management

The Integra FS-KIT-2 is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.

• NEMA 3R Protection Rating
• Set of Two Vents
• Polycarbonate

The Allied Moulded AMVENT4XLG is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.

• NEMA 4X Protection Rating
• Set of Two Vents
• Polycarbonate

The Hammond SDVN4XN2 is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.

• NEMA 4X rated
• Protects from rain & hose-directed water spray
• Polycarbonate
• Set of 2 vents

The Hammond SDV280-1 is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.

• Rain-tight seal - NEMA Type 3R
• Package of 1
• Polycarbonate
• Internal vent channel & grille reduces insect intrusion

The Allied Moulded AMVENTLG is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.

• Rain-tight seal - NEMA Type 3R
• Set of two vents
• Polycarbonate
• Internal vent channel & grille reduces insect intrusion

The Saginaw Type 3R series has an easy to install snap fit design for use on air discharge side of fan package in NEMA 3R applications.

• System of protection NEMA Type 3R
• Cut-out dimensions: 10.04 x 10.04"
• Color: Black

The Bud Industries IPV-67161-B is designed to equalize internal pressure, and to prevent condensation..

• M16 x 1.5
• Black Polycarbonate
• Sold Individually
• IP 67

The Bud Industries IPV-67181-B is designed to equalize internal pressure, and to prevent condensation..

• M18 x 1.5
• Black Polycarbonate
• Sold Individually
• IP 67

The Stego MFR 012 series hygrostat is designed to control the relative humidity inside enclosures. When connected to an enclosure heater (dehumidifier), it will energize the heater at the humidity set point in order to raise the dew point. This helps prevent damage and malfunction of electronic components caused by condensation and corrosion.

• Mechanical Adjustable Hygrostat
• Humidity Setting: 35-95% RH
• Mounting: DIN Rail

The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices where a higher degree of sensing accuracy is required. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.

• AdjustableThermostat
• Setting Range (NC): 40-140 F
  Setting Range (NO): 40-140 F

The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices where a higher degree of sensing accuracy is required. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.

• AdjustableThermostat
• Setting Range (NC): 5-60 C
  Setting Range (NO): 5-60 C

The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices where a higher degree of sensing accuracy is required. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.

• AdjustableThermostat
• Setting Range (NC): 5-60 C
  Setting Range (NO): 5-60 C